¿ªÔÆÌåÓý

  1. Jmriusers
  2. Messages
Single Messages Topics Expanded Polls

Locked Re: I am unable to read what type of decoder from the program track and mainline on LokSound and Broadway Limited decoders. I can read the Digitrax decoders.

 

"Verbal feedback" is for QSI decoders only and is on the QSI Misc tab and is called "Programming Verbal Acknowledgement".? It's bit 0 of CV 62.? But it only applies to Ops Mode programming (POM), QSI decoders never have verbal feedback when on Service Mode programming on program track.

Michael Mosher
Webmaster, ECSFM
Member SFRH&MS
DCC Master PVSMR

On 8/7/2018 10:47 PM, cwt2168@... wrote:
Ken, I found 1, 2, and 3. They were all good. Where do I find the "verbal
feedback" option at? Also are you saying to remove the grain of wheat bulb?
I also have gone back to 4.12 version. I have also tried without the
PowerPax and I still get the same error, " no response from loco". So it
"JMRI" does not tell me what type of decoder it is. So when it tells me this
I can not go into the programing mode in JMRI to program the address to the
engines.
Join [email protected] to automatically receive all group messages.