The "nce.NceConnectionStatus INFO - NCE EPROM revision = 7.3.0" in the log below indicates your drivers, jumpers, baud rate and JMRI settings are correct and that JMRI can communicate with your NCE USB.
We now need to see a log (and a report on what the NCE USB LEDs do) when you attempt to drive a loco, program a decoder).
--
Dave in Australia
toggle quoted message
Show quoted text
On 22 Jun 2017, at 10:05 AM, thirdgenfcarnut@... [jmriusers] <jmriusers@...> wrote:
All four jumpers on the USB Interface are in the off position. This configuration remains unchanged from before this PC was wiped and upgraded.
Here is a copy and paste of the Console Log
2017-06-21 19:49:07,328 util.Log4JUtil INFO - * JMRI log ** [main]
2017-06-21 19:49:07,375 util.Log4JUtil INFO - This log is appended to file: C:\Users\Steve\JMRI\log\messages.log [main]
2017-06-21 19:49:07,390 util.Log4JUtil INFO - This log is stored in file: C:\Users\Steve\JMRI\log\session.log [main]
2017-06-21 19:49:07,390 apps.AppsBase INFO - DecoderPro version 4.6-R81496dc starts under Java 1.8.0_131 on Windows 7 x86 v6.1 at Wed Jun 21 19:49:07 EDT 2017 [main]
2017-06-21 19:49:07,687 gui3.Apps3 INFO - Starting with profile My_JMRI_Railroad.3e514dad [main]
2017-06-21 19:49:07,921 node.NodeIdentity INFO - Using jmri-001D099D8DB6-3e514dad as the JMRI Node identity [main]
2017-06-21 19:49:09,151 usbdriver.UsbDriverAdapter INFO - NCE USB COM4 port opened at 9600 baud [main]
2017-06-21 19:49:09,354 nce.NceConnectionStatus INFO - NCE EPROM revision = 7.3.0 [AWT-EventQueue-0]
2017-06-21 19:49:15,004 util.FileUtilSupport INFO - File path program: is C:\Program Files\JMRI\ [main]
2017-06-21 19:49:15,004 util.FileUtilSupport INFO - File path preference: is C:\Users\Steve\JMRI\My_JMRI_Railroad\ [main]
2017-06-21 19:49:15,004 util.FileUtilSupport INFO - File path profile: is C:\Users\Steve\JMRI\My_JMRI_Railroad\ [main]
2017-06-21 19:49:15,004 util.FileUtilSupport INFO - File path settings: is C:\Users\Steve\JMRI\ [main]
2017-06-21 19:49:15,004 util.FileUtilSupport INFO - File path home: is C:\Users\Steve\ [main]
2017-06-21 19:49:15,004 util.FileUtilSupport INFO - File path scripts: is C:\Program Files\JMRI\jython\ [main]
2017-06-21 19:49:18,941 throttle.ThrottlesPreferences INFO - Did not find throttle preferences file. This is normal if you haven't save the preferences before [Thread-8]
2017-06-21 19:49:18,957 hrottle.AbstractWiThrottlePreferences INFO - Could not find WiThrottle preferences file. Normal if preferences have not been saved before. [Thread-8]
