Due to a firmware problem, the NCE Power Pro is incapable of correctly programming CVs>256 in Program Track mode (a CV<256 will be reprogrammed instead of the correct one). However you can program CVs>256 of ESU decoders in Program Track mode provided you use a current version of JMRI (ESU has provided a workaround in their decoder firmware and JMRI uses this behind-the-scenes).
If you are using any ESU, Econami or Tsunami decoders, you MUST NOT use JMRI V4.2.1. You should always use the latest JMRI version with these decoders as it will prevent you mis-programming your decoders and will also have the latest fixes, updates for these decoders.
--
Dave in Australia
toggle quoted message
Show quoted text
On 22 Jun 2017, at 11:41 AM, s.w.yount@... [jmriusers] <jmriusers@...> wrote:
I have 4.2.1. JMRI and am having problems programming CVs 200-500. I have a PowerPro system (not a Power Cab). How do I get these higher CVs programmed. I have the lastest EPROM on my system, which is 03/01/2007c.
