Power Cab V1.28 does not support AIU commands. Power Cab V1.65 does. The SB5 uses V1.65 firmware.
Mini Panel is not suitable for multiple block detection. AIU is the correct device to use.
You need to isolate the problem to hardware or software.
You need to shut down JMRI and just watch the indicator LEDs on the AIU. If they only flash once and do not stay on, you have a problem with the detection side of things. If they stay on all the time there is a train in the block, you have a software problem.
--
Dave in Australia
toggle quoted message
Show quoted text
On 09/06/2014, at 12:17 AM, "Martin Ozolins mdozolins@... [jmriusers]"<jmriusers@...> wrote:
The AIU definitely didn't work with the PowerCab it's been
better since I switched to the SB5 System in JMRI preferences. I also
have a mini panel from NCE to try out, that may be more viable than the AIU.
