开云体育

I purchased a 7K with no power out on hf. Vhf/uhf are good. Receiver is in excellent condition. I have set the driver and finals bias and are good. Gate voltage of the finals measures 2.4V. Power setting is 100% but measures negligible power into a dummy load. Is it possible the finals are bad?

I have the opportunity to purchase a second separation cable for my IC-7000. I am not 100% sure I really need it, but considering how rare they are now, if mine ever craters, or I want to move my radio around without pulling the cable out, or I find another IC-7000 to purchase (I'm looking) I'll be pissed I passed on purchasing this one. What's a fair price for one (used)? Grant VA6GT

I was at another fellow hams residence and since he had the equipment, I thought it would be a good idea to double check my antenna, coax etc. What is confusing is that he has both an old-school power meter (which was showing significant return power on my antenna run) and antenna analyzer (also showing higher SWR at needed frequencies), neither which coincide with what shows on the ic-7000 radio display SWR meter when I xmit. Then I read this in the manual.... The IC-7000 has a built-in circuit for measuring antenna SWR—no external equipment or special adjustments are necessary. The IC-7000 can measure SWR in 2 ways - spot measurement and plot measurement. The SWR can only be measured on [ANT1] connector, in the HF/50 MHz bands when an antenna is connected. However, when a 144/430 MHz antenna is connected to [ANT2], the SWR cannot be measured. Does this mean that when transmitting on 2m/70cm, even though the SWR meter "moves", it is not really accurate or reading anything meaningful? I've been assuming I had a good antenna run, but now I am doubtful (though it does seem to be working). I realize that the "graph" SWR meter does not work on 2m/70cm, but always assumed the spot meter was true... I've ordered a NanoVNA to do some additional testing. Any other reasons you can suggest that would cause the discrepancies? I did the standard multimeter tests for continuity etc while bending, twisting, and moving the coax etc...everything "seems" OK at the DC level. Grant VA6GT

Hi folks, I am looking for a 2nd IC7000. If someone wants to get rid of one in excellent condition and built after 2012, give me mail with your asking price. 73 Marcus dl3nc

I'm still desperately searching for an MFJ-706 or MFJ-7000 for a special project. I believe the MFJ-706 was sold in greater numbers, but both types are physically identical and I can make the small electrical modification required to the 7000 version. Bob, G8IYK

My 7000 keys but no output on either 2 or uhf frequency hf and 6 meters work perfectly any help to diagnose would be grateful Rupert 6y5rw

I have a complete and fully functional ic7000, in pelican case along with LDG tuner and microHam USBIII computer interface for sale. This is truly one of the early DC to Daylight Shack in a box setups. I used to take it with me traveling, but have since moved to and Elecraft KX3, which is more portable, but only 1/10 the power… Anyhow, I haven’t used the 7000 in awhile and need to make some room. So am selling it. I’ll ship it via UPS. Asking $1000.00 -- 73 es God Bless, Art / K0ACP

I'm just trying to start digital comm and need help. What hardware is needed between my IC7000 and a Lenovo PC? Thanks

I have a S9 noise level on 20m all the time. The other bands are around S3. Anyone else have similar noise? Ed

So, I have recently moved my IC-7000 to my truck, connected to an ICom AH-4 tuner mounted in the bed for HF. The 2m/70cm antenna is also in the truck bed. When transmitting VHF, I am getting reports which seems to be ignition noise interference. At this point, I have some the remote head cable wrapped though some ferrite. Not sure what else would be recommended...just ferrite everything up as much as possible? Any other ideas? Grant VA6GT

I have contant cw on all bands when in the CW Mode. Any clues?

It is appreciated that if anyone can give some repair hint. my 7000 off freq e.g 11xmhz when 146mhz selected during the low power transmission (1w). It is same problem in 70cm band too. Anything above 5w is working perfectly. Wondered if anyone had same issue and has fixed.

https://forums.qrz.com/index.php?threads/icom-ic-7000-transceiver.908988/ Not mine, just sharing.

Just found the rotary switch on the bottom left of the faceplate (PBT/M-ch RIT) won't push in so I have limited capability to get to the memory channels. Looking to get a replacement. Will KA3UQQ

I am trying to set up VARA FM with my 7000. Is it true for VHF I have to use the 6 pin data port on back and not the 13 pin port?

Would like your IC-706 mk ll G in an exchange or part-exchange deal with my immaculate IC-7200, side handles, fitted leather case, all original accessories, large binder of manuals reviews, mods. A deal may only be possible in the UK due to high carriage costs, but try me anyway!