开云体育

Speaker, Try headphones in sockets one on side of head, one rear. Try different modes perhaps as well. Cheers Neil ZL3ADC

Tried all variations of squelch and rf gain . Also if I enable voice announcements I don't get audio. Without without earphones

Hi Rick What's the procedure for full reset? James

Hi Geoff Thanks for your response. Played around with squelch, rf gain and still no joy. No signal strength on s meter . I don't have a mic yet so can't test tx yet.

Are you sure the RF Gain control is set correctly and you are not just at full squelch? What is the current setting for the RF Gain / Squelch control? yahoo.com.au@groups.io> wrote:

Full reset, not just memory reset. gmail.com@groups.io> wrote:

Some things to try; Do you see any effect on the S meter bar graph when you rotate the mute/rf att knob. Set the mute/rf att. and volume to the mid 12 o'clock position Feed a modulated signal in

Just an audio pop on startup, screen/buttons all seem function ok

Hi Max thanks for the reply Did a memory clear on startup and still the same. no reception/sound on all bands including v/uhf james vk2vjz

?Do a reset before anything else. Oh, what about VHF and UHF? Max KG4PID

Hi all I recently acquired a second hand 7000 with what looks like a fault. It powers on and all front panel controls seem to be ok but when i apply a signal on any band there is no rx indication and

Hi Michael I had a 4416 in my crew cab truck hooked to my 7K with the radio body, booster box, and independent battery 100A AGM (much less noise) in a radio box I made in my locked canopy, and the

Hello All, I want to connect my 7000 to an MFJ-4416C voltage booster's keying circuit so I don't have to leave the booster ON - It generates rolling switching noise when just left on.? Anywho, my

hmmm.. no email on QRZ?? ?I just fixed that... so you can go look again..? and I can't? see yours... so try N0TRK at COX.NET

Mary I would like to buy your radio. There was no email for you at qrz so please email me if you see my address there. 73. De W4AWI planet95x@...

Hello greetings friend Maria, I'm António, I'm also a radio amateur technician, I live here in Brazil. Em sex., 18 de out. de 2024 às 19:55, Mary Joseph via

It is with a heavy heart that I am looking to sell my IC7000 - This was my NPOTA rig? - and it performed flawlessly.? ?Unfortunately I no longer have time for POTA and the radio is just sitting

Hi Reg Once the burnt area has been cleaned you can get an idea of ??how to proceed. I'll tell you how I did it : If there are no SMD components in the area (or even a few of them) but only

Hi Pasquale I've spoken to the owner and he will clean the area around the coil and then take photos We both have the flu and he'll do it as soon as hr feels better Thank you very much for all your

Thanks Michael. I have a limited space Shack so the small KLH speaker is just what I need. I’ll order a 3.5 mm mono plug tomorrow. K7HPF-Gene