Re: IC-7000 no rx and no sound out from speaker
|
Are you sure the RF Gain control is set correctly and you are not just at full squelch?? What is the current setting for the RF Gain / Squelch control?
?
On Tue, Oct 29, 2024 at 3:00?PM James Tiberius via <nono2212000= [email protected]> wrote: Hi all
I recently acquired a second hand 7000 with what looks like a fault.
It powers on and all front panel controls seem to be ok but when i apply a signal on any band there is no rx indication and no sound from speaker even when squelch is off.
Any advice would be much appreiated
James
|
