开云体育

MW is on the S3 menu. 73 Danny, K5CG HH 550-0609 SKCC 14257 To: "ic7000" <[email protected]> Sent: Saturday, August 10, 2024 11:07:10 AM Subject: Re: [ic7000] Pregaming a Memory Channel

Bob, thanks for the tip - I'll try it this weekend. Gene

Do you have a "MW" or "memory write" button? I can't look at a manual right now but it's common for Icom to have this button. Some work this way... quick push of the MW button, the memory

Hi All! I primarily use my IC-7000 for FT8 ops these days, where the latest "In Thing" is SuperFox mode. It's new, and we're all in the learning phase of figuring out how to get the best performance

Once I get the FM freq, dup, & tone working (so I can connect with the repeater) I push " V menugrp " to exit the tone set mode. What are the next steps to program a memory channel? Gene, K7HPF

Thanks very much Paul. I will give this method a try. Cheers and 73 Dan VE7CTN

It’s just volume. Whistle, say a long ‘fiiiiiive’, white noise; all good. Just drive it as hard as you can. You don’t need an RF meter of any sort to set idle current. Thank You Paul

Thanks for the feedback Paul. Very good. For the idle current adjustment all I need is an rf meter and an ammeter. That’s ok. For the power adjustments, when you say “saturate the mic with

You can probably skip the drive adjustments and maybe the power output adjustments but you absolutely need to do the idle adjustment. You do need a special set up for the drive (not driver)

Hello All, I have a couple of 7ks. ?A newer one works perfectly, as far as I can tell. ?An older one has low output and the driver board is suspect. ?I intend to replace the driver board - new

It's an old topic, but just to affirm that replacing C501 & C502 for new ones solved my problem.

PLEASE start a new topic! 73 Danny, K5CG HH 550-0609 SKCC 14257 To: "ic7000" <[email protected]> Sent: Wednesday, July 24, 2024 9:55:19 PM Subject: Re: [ic7000] Wanted: MFJ-7000 Looking for

Looking for a working RF board for my 7000 [email protected]> wrote:

That would only give me the AATU functions (for which I have many other choices) though, and not the other features of the MFJ-706 or 7000 Bob Yahoo Mail: Search, organise, conquer On Wed, 24

I believe that you will find it far easier to find an MFJ 939I like I used with my IC-7000 with no problems JD KE4MD

Hi, All, I'm still seriously searching for an MFJ-7000, or an MFJ-706, for an emcomms project. Bob, G8IYK

Hi If the defect appeared after the driver was repaired, I will change 2 ribbon cable between PA unit and MAIN unit. 73s Pasquale IW0HEX

G'day.... I have an IC7000 on the bench that has me stumped for an answer for a few months now, it came to me from a friend and the driver had burnt up with the owner noting that it had odd audio and

Pasquale, Paul, Thank you. I see Mouser has them in stock, $21. I may attempt to fix that burned board. Good project for a rainy day. Shipping to you may be quite expensive but it's only 900 miles

Thanks Bob I fixed 2 ICOM 7000 with PD50015 burnt ; compliments for your job and thanks for your feedback Best 73 de IW0HEX Pasquale (Rome, ITALY)