开云体育

I have, works great. 73's - Glenn

2 others I know of besides RT Systems. Rumtrol7000 - can't find a download for it but I have it so DM me if interested. and IC7000BKT https://www.maniaradio.it/en/ic7000bkten_download.html Danny K5CG

RT Systems IC-7000 RADIO PROGRAMMING SOFTWARE https://www.rtsystemsinc.com/IC-7000-Radio-Programming-Software_ep_105-1.html

Has anyone used software to programme the IC7000.If what one.Thanks Morrie

Steve, I'm using a cheap BNC to "Mini Test Clip" 50 ohm coax cable.? Similar to this: https://a.co/d/5stAcq1 You're right in that I probably was getting reflections -- that would make sense --

Nick, At 124 MHz it is important to keep a relatively constant impedance path from P4 to the counter.? My 8924C has 50 ohm inputs and I used a 50 ohm 500 MHz rated scope probe, with a short barrel

Hi Steve, I'm using a Aim-TTI TF930 to measure P4.? I just received the counter on Tuesday and was wanting to verify my REF OSC on my 7000.? In recent weeks, I noticed it was way off on USB/LSB

Thanks I ordered a 5". ________________________________ Sent: Tuesday, March 28, 2023 9:14 AM To: [email protected] <[email protected]> Subject: Re: [ic7000] connecting external monitor Just be

This thread has got me thinking. I have a 5" display currently but I am going to try a composite/usb capture device to route the ic-7000 display to a window on the PC and see how that looks. May be

Looks great with a small (7-10 inch) TV sets such as those from Sharper Image and others (what I use with my go-box) DC operated and uses the same power source as your radio. I have a USB charging

Just be aware..going much larger than 7" and the resolution will be unacceptable. I connected to a standard 15" and it looks pretty blocky.

Connecting to an existing in car monitor is probably a hands on research project. Really to broad of a question to answer here. You would need for the monitor to have a composite video signal jack

My car has already monitor for iCar or GoogleCar etc... is there a way to connect to it?

Just know there is two different video standards used in the 7k NTSC for the US version and PAL in UK/OZ version

Danny, Thanks for the tips, appreciated. 73 Darrell AB2E ________________________________ Sent: Monday, March 27, 2023 11:51 AM To: ic7000 <[email protected]> Subject: Re: [ic7000] connecting external

The device listed at amazon here will NOT work. It requires a VGA input. Right there in the description... VGA To RCA Adapter As others have already mentioned, a TV with a composite input is the

That should work, Assuming the monitor you are connecting to does not have a Analog Composite input jack (Generally a yellow RCA jack.) another alternative, if looking at small monitors, is to use an

This assumes Darrell has or has access to a monitor that has the YELLOW composite video jack...? Without one of those, he would need the device to convert Composite Video to HDMI or VGA... 73 Dallas

Darrell: I just use a cable with a standard 1/8 inch male plug to RCA male plug between the radio and monitor. Never had a problem. 73, Bob, WB2DWD

Hi all, I'm hoping to connect a small external monitor (6" or 7"). It looks like the 3.5mm female plug on the back of the 7000 would feed to a typical yellow RCA plug. I saw this box which looks like