Re: connecting external monitor
|
That should work, Assuming the monitor you are connecting?to does not have a Analog Composite input jack (Generally a yellow RCA jack.)? another alternative, if looking at small monitors, is to use an automotive backup camera monitor. Here's an example?Amazon search. This has the advantage of running off your 12 volt?powersupply.
73 Joe KR0UT
On Mon, Mar 27, 2023 at 12:57?AM AB2E Darrell < ab2e@...> wrote:
Hi all,
I'm hoping to connect a small external monitor (6" or 7").
It looks like the 3.5mm female plug on the back of the 7000 would feed to a typical yellow RCA plug.
I saw this box which looks like it would do the trick, since I did not find an adapter online.
If you're using a different type of hookup please email me.
On a separate note,
it appears the shield for the 60m diode mod to open up the band is securely fastened to the board.
Does anyone know if there is a trick or workaround to removing it to get to the SMT diode to remove it?
At this point I'm afraid to proceed for fear of cracking the traces if the board bends too far.
73 Darrell AB2E
|
