Sounds very scammy to me. Photos are almost 1.5 years old.
73,
Steve KW5CQ
|
Dear Tommy,
When we switch on the radio the relay vibrates indefinitely and won't switch on..i thought it may be cpu issue so got one cpu and replaced but the problem persists, i can send that extra cpu if you need, regarding the cpu issue..a recalling from mobile phone technician on the dsp ic solved many cpu issues ,
73
Prabhu
toggle quoted message
Show quoted text
On Tuesday, 18 March 2025, Tommy Wooten via <kf4rwg= [email protected]> wrote: > Hi, > Why is the logic assembly sitting on top of the radio? > What do you mean by relay vibration issue? > Thanks > Tommy KF4RWG > On Tue, Mar 18, 2025 at 12:26?PM Prabhu via <vu2cck= [email protected]> wrote: >> >> Hi , >> I am having an icom ic7000 fully intact but has relay vibration issue ,so any friends need for parts or repair it can send across, I can ship to any where fedex,dhl and ups can deliver ,shipping charges as actuals or as per your advice, the price is 400usd plus shipping charges,Radio+original mic will be send ,the pictures are attached here,contact me for more specific details, if some one wants to buy as group you can plan accordingly for your needed parts, >> >> 73 >> Prabhu > > _._,_._,_ > ________________________________ > 开云体育 Links: > > You receive all messages sent to this group. > > View/Reply Online (#42990) | Reply to Group | Reply to Sender | Mute This Topic | New Topic > Your Subscription | Contact Group Owner | Unsubscribe [ vu2cck@...] > > _._,_._,_
|
Hi, Why is the logic assembly sitting on top of the radio? What do you mean by relay vibration issue?
Thanks Tommy KF4RWG
Hi ,
I am having an icom ic7000 fully intact but has relay vibration issue ,so any friends need for parts or repair it can send across, I can ship to any where fedex,dhl and ups can deliver ,shipping charges as actuals or as per your advice, the price is 400usd plus shipping charges,Radio+original mic will be send ,the pictures are attached here,contact me for more specific details, if some one wants to buy as group you can plan accordingly for your needed parts,
73
Prabhu
|
Hi ,
I am having an icom ic7000 fully intact but has relay vibration issue ,so any friends need for parts or repair it can send across, I can ship to any where fedex,dhl and ups can deliver ,shipping charges as actuals or as per your advice, the price is 400usd plus shipping charges,Radio+original mic will be send ,the pictures are attached here,contact me for more specific details, if some one wants to buy as group you can plan accordingly for your needed parts,
73
Prabhu
|
Re: Looking for parts, band down button and stand
Hi,
Email me directly
KR
Andrew
toggle quoted message
Show quoted text
-----Original Message----- From: [email protected] < [email protected]> On Behalf Of Geoffrey E. Gallaway Sent: 17 March 2025 18:03 To: [email protected]Subject: Re: [ic7000] Looking for parts, band down button and stand Hey Andrew, Thank you, that's very kind. They had some of the parts and may be able to find others from scrapped radios. They asked that I send them a mailing address and they'll send an invoice over. If you're good with that, please directly email me your shipping address. Thanks! Geoff KC8FDU On Mon, Mar 17, 2025, at 12:46, Andrew Lenton wrote: I can, did they have the parts? If so I can buy and post on
KR
Andrew
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Geoffrey E.
Gallaway
Sent: 17 March 2025 17:40
To: [email protected]
Subject: Re: [ic7000] Looking for parts, band down button and stand
Hi Andrew,
I emailed them last week and this morning they informed me that they
cannot sell to the US.
Thanks,
Geoff, KC8FDU
On Mon, Mar 17, 2025, at 12:38, Andrew Lenton wrote:
Hi try Icom UK
From: [email protected] <[email protected]> On Behalf Of Geoffrey E.
Gallaway
Sent: 17 March 2025 16:05
To: [email protected]
Subject: [ic7000] Looking for parts, band down button and stand
Hello,
I recently bought a used 7000 and it's missing a few parts. If anyone
has the following parts, new or used, please let me know:
Band down button: MP34 (F)
Desk stand: MP33 (C), MP32 (C), MP31 (C), and MP19 (C) x 4
I've contacted Icom support but those parts are no longer available
from them.
Thanks,
Geoff, KC8FDU
|
Re: Looking for parts, band down button and stand
Hey Andrew,
Thank you, that's very kind. They had some of the parts and may be able to find others from scrapped radios. They asked that I send them a mailing address and they'll send an invoice over. If you're good with that, please directly email me your shipping address.
Thanks!
Geoff
KC8FDU
toggle quoted message
Show quoted text
On Mon, Mar 17, 2025, at 12:46, Andrew Lenton wrote: I can, did they have the parts? If so I can buy and post on
KR
Andrew
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Geoffrey E. Gallaway
Sent: 17 March 2025 17:40
To: [email protected]
Subject: Re: [ic7000] Looking for parts, band down button and stand
Hi Andrew,
I emailed them last week and this morning they informed me that they cannot
sell to the US.
Thanks,
Geoff, KC8FDU
On Mon, Mar 17, 2025, at 12:38, Andrew Lenton wrote:
Hi try Icom UK
From: [email protected] <[email protected]> On Behalf Of Geoffrey E.
Gallaway
Sent: 17 March 2025 16:05
To: [email protected]
Subject: [ic7000] Looking for parts, band down button and stand
Hello,
I recently bought a used 7000 and it's missing a few parts. If anyone
has the following parts, new or used, please let me know:
Band down button: MP34 (F)
Desk stand: MP33 (C), MP32 (C), MP31 (C), and MP19 (C) x 4
I've contacted Icom support but those parts are no longer available from them.
Thanks,
Geoff, KC8FDU
|
Re: Looking for parts, band down button and stand
I can, did they have the parts? If so I can buy and post on
KR
Andrew
toggle quoted message
Show quoted text
-----Original Message----- From: [email protected] < [email protected]> On Behalf Of Geoffrey E. Gallaway Sent: 17 March 2025 17:40 To: [email protected]Subject: Re: [ic7000] Looking for parts, band down button and stand Hi Andrew, I emailed them last week and this morning they informed me that they cannot sell to the US. Thanks, Geoff, KC8FDU On Mon, Mar 17, 2025, at 12:38, Andrew Lenton wrote: Hi try Icom UK
From: [email protected] <[email protected]> On Behalf Of Geoffrey E.
Gallaway
Sent: 17 March 2025 16:05
To: [email protected]
Subject: [ic7000] Looking for parts, band down button and stand
Hello,
I recently bought a used 7000 and it's missing a few parts. If anyone
has the following parts, new or used, please let me know:
Band down button: MP34 (F)
Desk stand: MP33 (C), MP32 (C), MP31 (C), and MP19 (C) x 4
I've contacted Icom support but those parts are no longer available from them.
Thanks,
Geoff, KC8FDU
|
Re: Looking for parts, band down button and stand
Hi Andrew,
I emailed them last week and this morning they informed me that they cannot sell to the US.
Thanks,
Geoff, KC8FDU
toggle quoted message
Show quoted text
On Mon, Mar 17, 2025, at 12:38, Andrew Lenton wrote: Hi try Icom UK
From: [email protected] <[email protected]> On Behalf Of Geoffrey E. Gallaway
Sent: 17 March 2025 16:05
To: [email protected]
Subject: [ic7000] Looking for parts, band down button and stand
Hello,
I recently bought a used 7000 and it's missing a few parts. If anyone
has the following parts, new or used, please let me know:
Band down button: MP34 (F)
Desk stand: MP33 (C), MP32 (C), MP31 (C), and MP19 (C) x 4
I've contacted Icom support but those parts are no longer available from them.
Thanks,
Geoff, KC8FDU
|
Re: Looking for parts, band down button and stand
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Geoffrey E. Gallaway
Sent: 17 March 2025 16:05
To: [email protected]
Subject: [ic7000] Looking for parts, band down button and stand? I recently bought a used 7000 and it's missing a few parts. If anyone has the following parts, new or used, please let me know: Band down button: MP34 (F)
Desk stand: MP33 (C), MP32 (C), MP31 (C), and MP19 (C) x 4 I've contacted Icom support but those parts are no longer available from them.
|
Looking for parts, band down button and stand
Hello,
?
I recently bought a used 7000 and it's missing a few parts. If anyone has the following parts, new or used, please let me know:
?
Band down button: MP34 (F)
Desk stand: MP33 (C), MP32 (C), MP31 (C), and MP19 (C) x 4
?
I've contacted Icom support but those parts are no longer available from them.
?
Thanks,
Geoff, KC8FDU
|
Re: Fixing the unrepairable IC7000
Theres caps smooth the 5V rail, and were rated at 16V, Icom replacements are now at least 25V, Tants. have a life! The low capacity would have caused switching noise on the BUK 12V line, but should have worked. I have had this fault over 20 times with these radios. ? KR ? Andrew ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Craig- KB4RU via groups.io
Sent: 13 March 2025 15:46
To: [email protected]
Subject: Re: [ic7000] Fixing the unrepairable IC7000? Based on the appearance of the solder joints, it looked like they were changed after radio was sold. ?It didn’t look factory. ?The solder joints were not clean, caps looked like a different brand, and looks like the solder used was different. ?I think someone serviced that display at some point and used wrong caps is more likely. ?
On Mar 13, 2025, at 8:13?AM, Bob via groups.io <W4JFABob@...> wrote:
? Nice job! I wonder if someone changed those caps for a particular reason or if it was a factory?change that didn't make it to ? Caps were 47uF instead of the 100uf listed in the service manuals.? Which I suspect lead to them failing or cause issues ? ? What do you mean by "inappropriate value capacitors"? ? It’s been a while since I updated, but the repair has been a major challenge.? Finally have a major update.? The radio has been repaired without having to replace any boards.? I bought a new DDS, Logic, and Main, but by the time the new boards would come in, I would find and repair the original.? So, now I have spares.? Onto the results! Not Powering on: Dreaded Click-Click was traced to Display Board having inappropriate value capacitors and burned spot next to connector on Main Board.? Replaced capacitors in Display Board and rebuilt the area around the burned spot on main board.? There was a broken/burned trace under the connector.? After this section was done, it powered up. Logic board- NO AUDIO.? This was a PAIN.? Found burned inductor L551, replaced.? Still no audio.? Replaced several resistors and capacitors trying to rule out issues along the signal path, no luck.? Replaced IC551 due to a suspicious spot and was in the path of the burned inductor….still nothing.? I pulled my 7000 back out and mapped ALL the signals for the audio circuits I could with an oscilloscope and found NO CLOCK SIGNAL on the CLK circuit.? Traced back to the same connector that was affected on the main board.? R705 on Logic Board had over 10x the resistance it was supposed to.? Replaced it and she is singing again. DDS board- no idea.? Seems fine for now, but I will find out when I move onto the alignment.? It said no RX/TX, but it seems like it is receiving.? If I post on this again, then I found a problem.? If not, there was no problem with the DDS unit.
|
Re: Fixing the unrepairable IC7000
Based on the appearance of the solder joints, it looked like they were changed after radio was sold. ?It didn’t look factory. ?The solder joints were not clean, caps looked like a different brand, and looks like the solder used was different. ?I think someone serviced that display at some point and used wrong caps is more likely.
toggle quoted message
Show quoted text
On Mar 13, 2025, at 8:13?AM, Bob via groups.io <W4JFABob@...> wrote:
? Nice job! I wonder if someone changed those caps for a particular reason or if it was a factory?change that didn't make it to the documentation??? Bob W4JFA Caps were 47uF instead of the 100uf listed in the service manuals.? Which I suspect lead to them failing or cause issues ? What do you mean by " inappropriate value capacitors"?It’s been a while since I updated, but the repair has been a major challenge.? Finally have a major update.? The radio has been repaired without having to replace any boards.? I bought a new DDS, Logic, and Main, but by the time the new boards would come in, I would find and repair the original.? So, now I have spares.? Onto the results!
?
Not Powering on: Dreaded Click-Click was traced to Display Board having inappropriate value capacitors and burned spot next to connector on Main Board.? Replaced capacitors in Display Board and rebuilt the area around the burned spot on main board.? There was a broken/burned trace under the connector.? After this section was done, it powered up.
?
Logic board- NO AUDIO.? This was a PAIN.? Found burned inductor L551, replaced.? Still no audio.? Replaced several resistors and capacitors trying to rule out issues along the signal path, no luck.? Replaced IC551 due to a suspicious spot and was in the path of the burned inductor….still nothing.? I pulled my 7000 back out and mapped ALL the signals for the audio circuits I could with an oscilloscope and found NO CLOCK SIGNAL on the CLK circuit.? Traced back to the same connector that was affected on the main board.? R705 on Logic Board had over 10x the resistance it was supposed to.? Replaced it and she is singing again.
?
DDS board- no idea.? Seems fine for now, but I will find out when I move onto the alignment.? It said no RX/TX, but it seems like it is receiving.? If I post on this again, then I found a problem.? If not, there was no problem with the DDS unit.
|
Re: Fixing the unrepairable IC7000
Nice job! I wonder if someone changed those caps for a particular reason or if it was a factory?change that didn't make it to the documentation??? Bob W4JFA
Caps were 47uF instead of the 100uf listed in the service manuals.? Which I suspect lead to them failing or cause issues ? What do you mean by " inappropriate value capacitors"?It’s been a while since I updated, but the repair has been a major challenge.? Finally have a major update.? The radio has been repaired without having to replace any boards.? I bought a new DDS, Logic, and Main, but by the time the new boards would come in, I would find and repair the original.? So, now I have spares.? Onto the results!
?
Not Powering on: Dreaded Click-Click was traced to Display Board having inappropriate value capacitors and burned spot next to connector on Main Board.? Replaced capacitors in Display Board and rebuilt the area around the burned spot on main board.? There was a broken/burned trace under the connector.? After this section was done, it powered up.
?
Logic board- NO AUDIO.? This was a PAIN.? Found burned inductor L551, replaced.? Still no audio.? Replaced several resistors and capacitors trying to rule out issues along the signal path, no luck.? Replaced IC551 due to a suspicious spot and was in the path of the burned inductor….still nothing.? I pulled my 7000 back out and mapped ALL the signals for the audio circuits I could with an oscilloscope and found NO CLOCK SIGNAL on the CLK circuit.? Traced back to the same connector that was affected on the main board.? R705 on Logic Board had over 10x the resistance it was supposed to.? Replaced it and she is singing again.
?
DDS board- no idea.? Seems fine for now, but I will find out when I move onto the alignment.? It said no RX/TX, but it seems like it is receiving.? If I post on this again, then I found a problem.? If not, there was no problem with the DDS unit.
|
Re: Fixing the unrepairable IC7000
If it was the two Tants, then, their main issue was going SC intermittently!!
KR
Andrew
Get
Caps were 47uF instead of the 100uf listed in the service manuals. ?Which I suspect lead to them failing or cause issues
On Mar 12, 2025, at 7:21?PM, Bob via groups.io <W4JFABob@...> wrote:
?
What do you mean by " inappropriate value capacitors"?
It’s been a while since I updated, but the repair has been a major challenge.? Finally have a major update.? The radio has been repaired without having to replace any boards.? I bought a new DDS, Logic, and Main, but by the time the new boards would come in, I would find and repair the original.? So, now I have spares.? Onto the results!
?
Not Powering on: Dreaded Click-Click was traced to Display Board having inappropriate value capacitors and burned spot next to connector on Main Board.? Replaced capacitors in Display Board and rebuilt the area around the burned spot on main board.? There was a broken/burned trace under the connector.? After this section was done, it powered up.
?
Logic board- NO AUDIO.? This was a PAIN.? Found burned inductor L551, replaced.? Still no audio.? Replaced several resistors and capacitors trying to rule out issues along the signal path, no luck.? Replaced IC551 due to a suspicious spot and was in the path of the burned inductor….still nothing.? I pulled my 7000 back out and mapped ALL the signals for the audio circuits I could with an oscilloscope and found NO CLOCK SIGNAL on the CLK circuit.? Traced back to the same connector that was affected on the main board.? R705 on Logic Board had over 10x the resistance it was supposed to.? Replaced it and she is singing again.
?
DDS board- no idea.? Seems fine for now, but I will find out when I move onto the alignment.? It said no RX/TX, but it seems like it is receiving.? If I post on this again, then I found a problem.? If not, there was no problem with the DDS unit.
|
Re: Fixing the unrepairable IC7000
Caps were 47uF instead of the 100uf listed in the service manuals. ?Which I suspect lead to them failing or cause issues
toggle quoted message
Show quoted text
On Mar 12, 2025, at 7:21?PM, Bob via groups.io <W4JFABob@...> wrote:
? What do you mean by " inappropriate value capacitors"?It’s been a while since I updated, but the repair has been a major challenge.? Finally have a major update.? The radio has been repaired without having to replace any boards.? I bought a new DDS, Logic, and Main, but by the time the new boards would come in, I would find and repair the original.? So, now I have spares.? Onto the results!
?
Not Powering on: Dreaded Click-Click was traced to Display Board having inappropriate value capacitors and burned spot next to connector on Main Board.? Replaced capacitors in Display Board and rebuilt the area around the burned spot on main board.? There was a broken/burned trace under the connector.? After this section was done, it powered up.
?
Logic board- NO AUDIO.? This was a PAIN.? Found burned inductor L551, replaced.? Still no audio.? Replaced several resistors and capacitors trying to rule out issues along the signal path, no luck.? Replaced IC551 due to a suspicious spot and was in the path of the burned inductor….still nothing.? I pulled my 7000 back out and mapped ALL the signals for the audio circuits I could with an oscilloscope and found NO CLOCK SIGNAL on the CLK circuit.? Traced back to the same connector that was affected on the main board.? R705 on Logic Board had over 10x the resistance it was supposed to.? Replaced it and she is singing again.
?
DDS board- no idea.? Seems fine for now, but I will find out when I move onto the alignment.? It said no RX/TX, but it seems like it is receiving.? If I post on this again, then I found a problem.? If not, there was no problem with the DDS unit.
|
Re: Fixing the unrepairable IC7000
What do you mean by " inappropriate value capacitors"?
It’s been a while since I updated, but the repair has been a major challenge.? Finally have a major update.? The radio has been repaired without having to replace any boards.? I bought a new DDS, Logic, and Main, but by the time the new boards would come in, I would find and repair the original.? So, now I have spares.? Onto the results!
?
Not Powering on: Dreaded Click-Click was traced to Display Board having inappropriate value capacitors and burned spot next to connector on Main Board.? Replaced capacitors in Display Board and rebuilt the area around the burned spot on main board.? There was a broken/burned trace under the connector.? After this section was done, it powered up.
?
Logic board- NO AUDIO.? This was a PAIN.? Found burned inductor L551, replaced.? Still no audio.? Replaced several resistors and capacitors trying to rule out issues along the signal path, no luck.? Replaced IC551 due to a suspicious spot and was in the path of the burned inductor….still nothing.? I pulled my 7000 back out and mapped ALL the signals for the audio circuits I could with an oscilloscope and found NO CLOCK SIGNAL on the CLK circuit.? Traced back to the same connector that was affected on the main board.? R705 on Logic Board had over 10x the resistance it was supposed to.? Replaced it and she is singing again.
?
DDS board- no idea.? Seems fine for now, but I will find out when I move onto the alignment.? It said no RX/TX, but it seems like it is receiving.? If I post on this again, then I found a problem.? If not, there was no problem with the DDS unit.
|
Re: Fixing the unrepairable IC7000
|
Re: Fixing the unrepairable IC7000
Hi very well done ? 73 ? Andrew ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Craig- KB4RU via groups.io
Sent: 12 March 2025 17:31
To: [email protected]
Subject: Re: [ic7000] Fixing the unrepairable IC7000? It’s been a while since I updated, but the repair has been a major challenge. ?Finally have a major update. ?The radio has been repaired without having to replace any boards. ?I bought a new DDS, Logic, and Main, but by the time the new boards would come in, I would find and repair the original. ?So, now I have spares. ?Onto the results! Not Powering on: Dreaded Click-Click was traced to Display Board having inappropriate value capacitors and burned spot next to connector on Main Board. ?Replaced capacitors in Display Board and rebuilt the area around the burned spot on main board. ?There was a broken/burned trace under the connector. ?After this section was done, it powered up. Logic board- NO AUDIO. ?This was a PAIN. ?Found burned inductor L551, replaced. ?Still no audio. ?Replaced several resistors and capacitors trying to rule out issues along the signal path, no luck. ?Replaced IC551 due to a suspicious spot and was in the path of the burned inductor….still nothing. ?I pulled my 7000 back out and mapped ALL the signals for the audio circuits I could with an oscilloscope and found NO CLOCK SIGNAL on the CLK circuit. ?Traced back to the same connector that was affected on the main board. ?R705 on Logic Board had over 10x the resistance it was supposed to. ?Replaced it and she is singing again. DDS board- no idea. ?Seems fine for now, but I will find out when I move onto the alignment. ?It said no RX/TX, but it seems like it is receiving. ?If I post on this again, then I found a problem. ?If not, there was no problem with the DDS unit.
|
Re: Fixing the unrepairable IC7000
It’s been a while since I updated, but the repair has been a major challenge. ?Finally have a major update. ?The radio has been repaired without having to replace any boards. ?I bought a new DDS, Logic, and Main, but by the time the new boards would come in, I would find and repair the original. ?So, now I have spares. ?Onto the results!
?
Not Powering on: Dreaded Click-Click was traced to Display Board having inappropriate value capacitors and burned spot next to connector on Main Board. ?Replaced capacitors in Display Board and rebuilt the area around the burned spot on main board. ?There was a broken/burned trace under the connector. ?After this section was done, it powered up.
?
Logic board- NO AUDIO. ?This was a PAIN. ?Found burned inductor L551, replaced. ?Still no audio. ?Replaced several resistors and capacitors trying to rule out issues along the signal path, no luck. ?Replaced IC551 due to a suspicious spot and was in the path of the burned inductor….still nothing. ?I pulled my 7000 back out and mapped ALL the signals for the audio circuits I could with an oscilloscope and found NO CLOCK SIGNAL on the CLK circuit. ?Traced back to the same connector that was affected on the main board. ?R705 on Logic Board had over 10x the resistance it was supposed to. ?Replaced it and she is singing again.
?
DDS board- no idea. ?Seems fine for now, but I will find out when I move onto the alignment. ?It said no RX/TX, but it seems like it is receiving. ?If I post on this again, then I found a problem. ?If not, there was no problem with the DDS unit.
|
Re: Fixing the unrepairable IC7000
Take the spring out of a ball point pen, then through the pen away
KR
Andrew
Get
In case anyone loses the springs for their display unit or they lose their kick, you can buy springs on Amazon that fit perfectly and excellent strength.
?
Amazon link:
?
|
Andrew Lenton
Bob