开云体育

George The finals are either working or they are not - 0% or 100 % A big culprit is usually either the power supply - it MUST supply a minimum of 13.8 volts even under load or else it drops power. Or

Hi All. I have had an Icom IC-7000 for over a year now, having bought it second hand. Today I went to use the for a few SSB QSOs on 20 metres when I realised I couldn't get more than 40 watts out.

Is the SWR meter still visible but not showing a reading? From: ic7000@... [mailto:ic7000@...] On Behalf Of baulard69 Sent: Wednesday, December 19, 2012 5:25 AM To:

You might try a full reset if all else fails. WA4TE. 73's. Tom [Non-text portions of this message have been removed]

Edson, All, I have used my MP-1 with both the IC-7000 and my FT-817 with great success as a portable. I have used it a few times on a trailer hitch on my car and it worked well on higher frequencies.

Hi, I'm interested in this portable antenna (MP1 SuperStick Portable Vertical) to use when on trip. Anybody have this antenna using with IC-7000 ? Could give me an opinion ? Other option is

The ALC cable would have its center pin connected to ACC-6 (blue) and shield to ACC-2 (red). The STBY cable whould have its center pin connnected to ACC-3 (orange) and shield to ACC-2 (red which is

Where id you get a chance to play with it? 73 Will KB1PXU --- In ic7000@..., Andrew Squires <asquires@...> wrote:

I'd like to use my THP 550 watt amp with my Icom 7000. The diagram on page 21 of the Icom 7000 manual is not very clear. The amp has the ALC and STBY inputs, as shown in the diagram. And I have the13

Hi, My swr meter on the rig stopped working a while ago on all HF bands. I checked in all manuals and menus to find out if there was a swr meter disabling option but nothing. Is my rig faulty or am I

FWIW -- If you're using the IC-718 mic input, you should have the IC-7000 MIC GAIN turned way down -- maybe 10, out of 100. If you're using the IC-7000 microphone input, you woould get better results

Had a play with a 7100 last week and would not be so quick to write it off. It was a very well thought out radio. Love my IC7000 and had similar feelings as Dave AD7DB. I think just wait till you have

I agree ... All of my vehicles are heavily modified for off-road use as well. Using a touch screen on rough roads or off-road would surely be an issue. I also find most Touch Screens to be finicky ...

I agree ... All of my vehicles are heavily modified for off-road use as well. Using a touch screen on rough roads or off-road would surely be an issue. I also find most Touch Screens to be finicky ...

I consider the new IC7100 a great "arm chair" transceiver. -Tom, W3TLN

The ergonomics of the 7100 are all wrong for me as a mobile user. My IC7000 control head is mounted face up on the centre console just behind the gear lever. I have a remote 4" monitor on top of the

Found the answer to my problem this weekend by fooling around and adjusting the output attentuation level in DM780 to its highest setting. Transmit power stays pretty steady now allthough I still show

I'd rather have the 7000's color display and have the control head on the radio. More stable that way. Although there are a lot of D-Star systems around here I am still undecided on whether it's worth

The color of the screen is not a problem... but the screen may be a problem : - If you lost the screen on IC7000, you can use a little external screen ; - If you lost the screen on IC7100, no external

Lawrence, I'm using that tuner since the beginning and I can only say good thing about them (because I've two). One for my IC-7000 and another one for my IC-7200 which is my 100W backup system placed