Hi Pasquale
Many thanks for your reply and offer to help
I'll take photos and send it to you
73, Reg
On 15-09-2024 11:15, Pasquale S via
groups.io wrote:
toggle quoted message
Show quoted text
Hi Reg
so you are fault in VHF section, I'm studying the schematics !
Please, put here a photo with the burnt area so we can support
you with any idea to fix the PCB. In the past I fixed some PCBs
with burnt, often it's no possibile but sometimes can you do it.
73s, Pasquale IW0HEX
Il 15/09/2024 08:14, Reg Du Toit ha
scritto:
Hi Paul
Just thinking, I would even consider a faulty board as long
as its not burnt up. Mine burnt at the junction of Q501 and
L531. There was a dry joint on L531 and it burnt a hole in the
board. I would be able to get a working board out of the two
of them. Just hoping
Many thanks, Reg
|
Hi Reg
so you are fault in VHF section, I'm studying the schematics !
Please, put here a photo with the burnt area so we can support
you with any idea to fix the PCB. In the past I fixed some PCBs
with burnt, often it's no possibile but sometimes can you do it.
73s, Pasquale IW0HEX
Il 15/09/2024 08:14, Reg Du Toit ha
scritto:
toggle quoted message
Show quoted text
Hi Paul
Just thinking, I would even consider a faulty board as long
as its not burnt up. Mine burnt at the junction of Q501 and
L531. There was a dry joint on L531 and it burnt a hole in the
board. I would be able to get a working board out of the two of
them. Just hoping
Many thanks, Reg
|
Hi Paul
Just thinking, I would even consider a faulty board as long as its not burnt up. Mine burnt at the junction of Q501 and L531. There was a dry joint on L531 and it burnt a hole in the board. I would be able to get a working board out of the two of them. Just hoping
Many thanks, Reg
|
Hi Paul
Thank you for your reply
Reg
On 14-09-2024 16:57, Paul Hansen via
groups.io wrote:
toggle quoted message
Show quoted text
I
wish I could. I don’t have
any good ones.
?
Thank
You
?
Paul
W. Hansen, W6XA
Amateur
Radio Service
2134
Carthage Road
Tucker,
GA 30084
(864)
222-3539
?
?
My PA board has burnt out, I need a
replacement PA board,
can someone please help me with a PA board
|
I wish I could. I don’t have
any good ones.
?
Thank You
?
Paul W. Hansen, W6XA
Amateur Radio Service
2134 Carthage Road
Tucker, GA 30084
(864) 222-3539
www.amateurradioservice.com
?
toggle quoted message
Show quoted text
From: [email protected]
[mailto:[email protected]] On Behalf Of Reg Du Toit
Sent: Saturday, September 14, 2024 05:55
To: [email protected]
Subject: [ic7000] PA board
?
My PA board has burnt out, I need a replacement PA board,
can someone please help me with a PA board
|
Hi
My PA board has burnt out, I need a replacement PA board, can someone please help me with a PA board
Thanks
Reg
|
Re: IC-7000 PA board needed
|
My PA board suffered some corrosion damage and is not repairable. Looking for another PA board or a complete parts machine. thx, Alan, W4FBI
?
cass44 at outlook.com
|
Re: Mystery Bootscreen Firmware?
Thats right, the Icom screen is switched off with this funktion but the bluesceen is still there.
?
Iam realy the the one and only with this picture ?
|
Re: Mystery Bootscreen Firmware?
Hi, If that? TV related bootscreen message is categorized as an 'Opening Message' then it should be able to be deactivated by the following :
Press AF knob momentarily to enter Set mode. Press 'F2' (DISP) to go to Display set mode. Use F1/F2 to scroll to option 20 - 'Opening Message' Rotate Tune knob to select Opening Message 'OFF'
May or may not work for that particular issue and would obviously result in no opening message at all.
Paul
|
Re: Mystery Bootscreen Firmware?
If i skip it with yes it starts normaly with the icom symbol an than it works as it should. I can switsch to the tv receive with long press the noob and back to radio. At the next start the bluescreen is already there
|
Re: Mystery Bootscreen Firmware?
Had the iC 7000 new since 2012 - don’t remember ever seeing that bootscreen.
toggle quoted message
Show quoted text
On Aug 28, 2024, at 8:48?AM, Dovi via groups.io <mo_facebook@...> wrote:
? Thank you, how can I do that? Cant find any options for this
?
73
|
Re: Mystery Bootscreen Firmware?
The USA units were never activated for analog TV due to some federal requirement not being met.? I activated mine by removing a diode, but I never saw that screen. ? I believe they were shipped able to receive the NTSC format.? The document that was just posted to change the unit to PAL was very interesting. ? However, it receives analog TV channels, so not of much use anymore. ? When you clear the blue screen, does it go to a frequency screen or TV?? If it goes to TV, then do a long press on one of the knobs on the left of the radio (I forget which one) to get you off the TV.? Reboot and see if the blue screen is still there. ? ‘73 de Jim N2ZZ ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of davebb123456
Sent: Wednesday, August 28, 2024 11:16 AM
To: [email protected]
Subject: Re: [ic7000] Mystery Bootscreen Firmware?? Hi? It looks like the TV mode has been enabled, I think you will need to disable this mode ? Has Everyone the same Bootscreen like my IC-7000? Its seems like a firmeware that nobody knows? How can I switsch this off? Thanks a lot
|
Re: Mystery Bootscreen Firmware?
Here’s one on how to mod it:?
73’蝉
Don W
KD4APP
toggle quoted message
Show quoted text
Ok, I cant find pictures like that in the internet.
?
So I cant believe Iam the first with this screen after a mod?
|
Re: Mystery Bootscreen Firmware?
I use two different IC-7000s and have never seen this. Didn't even know
it had a TV mode.
Michael WA7SKG
Dovi via groups.io wrote on 8/27/24 11:23 PM:
toggle quoted message
Show quoted text
Has Everyone the same Bootscreen like my IC-7000?
Its seems like a firmeware that nobody knows?
How can I switsch this off?
Thanks a lot
|
Re: Mystery Bootscreen Firmware?
Ok, I cant find pictures like that in the internet.
?
So I cant believe Iam the first with this screen after a mod?
|
|
|
Re: Mystery Bootscreen Firmware?
Yes, I get the radio like it is
|
Re: Mystery Bootscreen Firmware?
AFAIK It’s a hardware mod to have it available. ?Did you just get the radio or did a firmware upgrade start this? ?
73’蝉
Don W
KD4APP
toggle quoted message
Show quoted text
Thank you, how can I do that? Cant find any options for this
?
73
|
Re: Mystery Bootscreen Firmware?
Thank you, how can I do that? Cant find any options for this
?
73
|
W4FBI
James F. Boehner, MD
Michael WA7SKG