开云体育

Lot's of discussion about the 7100. I'm wondering what the destiny will be for the 7000. I'm really surprised that the display on the 7100 is not in color. Also with the must be detached faceplate I'm

And you've got a great signal on 17M, Milverton. I've heard you many times. Keep 'em turnin'. Gary -- http://ag0n.net 3055: http://ag0n.net/irlp/3055 NodeOp Help Page: http://ag0n.net/irlp

Clete SIR! A very Justifiable RANT Lord knows, it seems that just about every other day. Someone, somewhere is finding a reason to bash the 7000. I am very happy with mine, and this radio stays

de WB2CPN With years of experience with radio transmitters of all sizes, I have a problem with some of the statements about grounding. I know "ground loops" very well from a couple of careers I have

Works perfectly with no problrms. Highly recommended. Tom

Hello, i had my IC7000 since april 2012. I use it without ground (in my car). My IC7000 all the time without ground at home (in reception only in HF). Any problem here. If your IC7000 is under

I have a problem that I've been trying to solve for 3 ? weeks. I am trying to get an ICOM IC 7000 to work with the ICOM remote software RS-BA1. Everything is working like it should except it will not

When I smoked my 7000 for the third time, the Icom tech's (3 of them) visited my shack and measured absolutely everything. Two of them were from the Japanese factory. They could find absolutely

Hello, I try to receive and transmit on marine channels (about 156 MHz) using IC-7000, of course. May anybody knows a good instruction manual - how to modify the 7000 to enlarge the basic frequency

All: If there's something about a "ground" connection to the radio that is causing a problem there has to be some reason for it. Frankly it doesn't make any sense to me and I see no mechanism that

Its seems any way I try to tune the radio (speaker output vs power level) I still show a few small bars on the ALC. I havent had anyone complaining about an overmodulated signal though, so I guess

I'll add, I have no ground connected to my 7000. -Tom, W3TLN

I spoke to Icom Michigan repiar. He told me after they did the repair they never had one come back. I read on the net that there is no heat compound on the bottom of the chip from the factory. When

As one of the victims of the smoking exit of my driver board, I should point out that ICOM France had acknowledged that there were a batch of IC7000's with a bad transistor, that, when it went, took

It's unfortunate that so much misinformation is available on forums, resulting in more problems, rather than more solutions. I apologize for repeating the following information that I posted not long

All, I want to thank EVERYONE for your help! As mentioned a few times, my problem was the Speaker/Phones switch on the back of the Head unit. It was set to `Phones', correcting that gives me enough

Hi ! Be careful: I guess a power line ground and an RF ground are quite a different thing , but maybe am I wrong ? Some opinion on this matter from you, Gurus ? Thanks , Augusto i2jjr

Mine was driven 6 feet, but it was into dry clay. The conductivity of the earth is very important. It needs to be moist earth to be effective.

Hi All Iv not had my 7K long and its only set at %30 power output so hopefully it will not smoke. But Iv even heard of others smoking just set on receive I am the third owner of the unit So it may

I’ve had my 7K for a few months now and really like it. I was wondering though if the ‘smoke’ only appears on VHF or can it happen on any band? Cheers – Don. Sent: Wednesday, December 12, 2012