Re: IC7000 no HF Transmit

Andrew Lenton All Messages By This Member #42906 Oh !!! Well done how much current was it drawing when you were measuring 6 Watts, now you can put a watt meter try FM or CW see if you get 100 Watts. If the rig draws 20 Amp and you are only getting a few Watts, then the transformer is faulty in some way. Order a new transformer any way, then you can move with fault finding. If you saw 6 Watts at the output of the transformer, then why was it not at the aerial socket? 73 Andrew ?Get BlueMail for Android ? toggle quoted message Show quoted text On 27 Jan 2025, 23:27, at 23:27, "Tommy Wooten via groups.io" <kf4rwg@...> wrote: Andrew I removed the PA board, separated the transformer and reinstalled the board so I could access the transformer output on the top side. See photo attached. Tommy On Mon, Jan 27, 2025 at 5:42?PM Andrew Lenton via groups.io <a= [email protected]> wrote: Yes indeed, CW or AM would be my preferred option, also you need a PEP Watt meter. KR Andrew ?Get BlueMail for Android ? On 27 Jan 2025, 22:35, at 22:35, "James Tiberius via groups.io" <nono2212000@...> wrote: In SSB mode current draw should be low until audio is being modulated. I would expect high current draw when using carrier modes

Join [email protected] to automatically receive all group messages.

开云体育