开云体育

Immediately flush with liquid flux cleaner a few times, followed by water and isopropynol flushes has worked ok for me in the past. Must be done before the paste dries in the needle. All the

I don't. Simple as that, I use disposable plastic tips, when the session is done, in the bin. No point trying to salvage half a gram of plastic that costs a few cents. >

It does help to know the magic words when looking for stuff. I use them for cleaning glue out of syringe needles. Do take the time to swipe the tips over some sandpaper, they are quiet sharp. I

the use not being critical; have a look to Aliexpress. https://www.aliexpress.com/w/wholesale-acupuncture-needles.html?spm=a2g0o.home.auto_suggest.2.650c76dbYeQBIc The lead time is usually 10 -

Ah, they're sold as 'printer cleaning needles' on Amazon uk, in handy kits of different sizes. https://www.amazon.co.uk/s?k=0.3mm+cleaning+needle (I have also bought a bunch of 3d printer nozzles,

Acupuncture needles rock! Otherwise a guitar 'E' string ( smallest diameter one ) range from .008(~.2mm) to .012inch(.305mm)

I’ll second the acupuncture needles. The 3D printing folk use them to clear nozzles, eg https://www.amazon.com/Printer-Cleaning-Stainless-Needles-Accessories/dp/B0DB1ZM9PD Tony Sent:

Hello Steve. I do not see any acupuncture needles available from Amazon on this side of the pond.? The other site also in the UK that you linked seems to require being a licensed acupuncturist in

<jpruitt67@...> wrote: Soak in IPA, and run through with acupuncture needles. I use #26 and #28 dispensing needles (on a dima dotmaster) and this gets them clean when they inevitably

How do you clean the needles used to dispense solder paste?? I thought I had it figured out as I got a 100ml luer lock syringe and ran 100ml of hot water through my #21 and #22 needles but the next

The usual way is to print a 100x100mm square, then measure it. Suppose you measure it at 101mm, your scaling factor becomes 100/101, or 99%. If the software can’t do it then the print dialog

got it! Thanks! Clark [email protected]> wrote:

Great advice! They are only thinking of printing letters for office use, and we come along with our odd purposes. -- Steven Greenfield AE7HD

Hi again Clark, I calibrated the printer by printing successive images on plain paper with different cal factors and measuring them until I got it right. A bit wasteful of paper but better that using

Hi Clark, If you are using Sprint-PCB,? when you click on the Print icon a window opens for printing. Along the top of that window there is a series of buttons for various functions including a

Morris, what is your calibration method, please? Clark Cone [email protected]> wrote:

Hi all, I had an unpleasant experience recently but fortunately not a complete disaster. I have been making PCBs for years using the toner transfer method. The software I use is Sprint PCB and I

Thanks. I'll check it out. Sam Reaves ARS W3OHM Owner / Moderator of: LeCroy Owners Group on 开云体育 Sencore Owners Group on 开云体育 Sprint Layout Group on 开云体育 Pulsonix EDA Group on

You can use FtatCAM http://flatcam.org/

Is there an easy way to convert 274-X files into files that a laser can understand? The Laser is 10W and can AFAIK accept G-Code. I would like to try etching isolation layers by painting the copper