开云体育

Hi Gandert, If I remember correctly, The black wire to the crossover is ground, the green is +30 volts, and the red going to the connection by the volume control is signal input. The two output wires

I`m not sure, but I think you can save all the info you need as a pre- set. Casey <herbert_effenberger@y...> wrote: sound also

Just so you folks know....... The Oops product is nothing more than Toluene. It can be bought at most drug stores and certainly paint stores hardware stores. I had a scientest friend anylyze the Oops

Hi zone, I'm still very busy to get the 760 working. But another problem occured. The amp is broke. I already knew that. But i thought that what new crossover I should be able to connect the 760

It helps to further mitigate crosstalk and rumble from those tonewheels prone to them. Raul

To everyone, When i picked up my a100 last week i didn't anticipate haveing to remove the decals that were stuck to the preset keys.But on closer inspection i saw that the glue in some areas was goopy

Ok,thanks for the info Raul. I guess i should consider puttin an rc kit in my a100 then. jeff

Is there anybody who has experience in simultaneously use of a XK-2 or XB-2 and its function as masterkeyboard to control one or more expander modules via midi? I am not able to find a trick to switch

Hey Bernie i have an M111 in pristine condition which i don't use. Give me a ring 08 90 229913 or 0417 950 987 and we will have a chat. Or give me your phone number and i will ring you. You won't be

In a message dated 02/24/2002 10:08:08 AM Eastern Standard Time, rcvmo@... writes: << it. I've got another motor control from an old treadmill that will go from 0 to 90 MPH that will do. At a high

dan. if and when you get to the shamrock hotel tavern wednesday nites at 9:30, look for the guy on the b3... or me the only guy there under 17... i play every week... the guy running it is the big

Eric On this recapping thing, I recapped my 145 leslie amps and it made a world of difference to them, maybe I should look at the preamp in my BC too eh? I've never thought of doing that. Dan S.

Dear Dave I live in Sherwood Park just east of Edmonton and go to Calgary once in a while. A friend of mine lives not to far from the "Shamrock Hotel" I usually stay at the Glenmore Inn while I do a

Hi all, Anybody know about rewiring or installing a kit that would enable the swell pedal to control the volume control on the input jack on my A-102?

Dear Friends, I got myself the same problem from Goffprof, than i saw on hammond zone 2 weeks ago. The shipping price is more than the price of the item itself. Where can i purchase in Europe a

Whats the advantage of adding this new rc network????? jeff

Raul, Do the keys have to be lifted out to change the TG caps.I have a newly aquired a-100 and what to go through it this summer.Get rid of all those wax caps.I also noticed that hair i've read

Eric, Not so with the wax caps, my friend. This is not a purely "Hammond" thing, either. When I removed the wax caps from my C-3, they had changed value anywhere from 20 - 80%. Fact, because I

Hi mates, Seriously, if you have a good generator...you have a good generator for life. Do you have really make mesurement on the old caps? If you do that, you will see that the value is the same,