开云体育

Daz and Darren, Our prayers and thoughts with you and yours.

daz395@... writes: Daz, You and your dad are in our prayers !! Ya'll hang in there.. Sincerely, Bill Giardina

Anyone know how to add reverb to a Hammond BV connected to a Leslie 122? The preamp isn't like a B3. Also, how can I make it overdrive a little more? It has some growl but a little more would be

You need to salvage the extra key contacts and bussbars from a doner spinet. Bussbars are long gold wires that run the length of the manuals, basicly the key contacts make contact with the bussbars,

Yes, there is indeed a difference in the sound. On BV and CV serial 17075 and above, they have a 91-frequency TG, with 12 complex tone wheels for frequencies 1-12. As a result, these models fold back

With a variable AC voltage isolation transformer, AKA Variac. Ron Bell.

Hi Gandert, You would get the contacts from scrapped organs. I know scrapping any Hammond is a horrible thought but it has to be done sometimes. I have the keyboards from a T-400 and an L-100, that

I hope the best for him Daz. Hang in there yourself !!!!!! Jeff

While I was looking through some old mails, I saw something about foldback. I know what it is. I also know my l122 don't have it. On the capitan folback site was a link to a folback site so i checked

Good luck, Sam Look close before you fire it up.. I am going to tell you something a dealer told me about starting up a very old machine. And don't ask me exactly what he meant or how, because I am

The TLC is the trick...both mine just gleam! They get rubbed an petted a least once a week.

Hi Ron, I am 68 and have been a Hammond nut since I was about 11. My mother purchased an A then. The guy who set it up...we knew nothing, had not played one for awhile. He was the studio organist at

An x-77 in good condition... I think I will just lay down and sigh!!!! Wonderful...

That is way cool Norm, Hammond people really do have things in common . I used to develop B&W film in my bathroom and I just finished a stint with my police dept. guarding our local nuclear power

The L-100 lower manual only has 7 buss bars in it.It is possible to install an upper manual from a doner L along with the 9 draw bars in the lower manual position of the working organ.The percussion

totally agreed here

I've heard some amazing reports of Hammonds surviving natural disasters; and though I was taken aback by the conditions of the organ that generated this thread, I keep reminding myself bad things

I own a BV which is attached to a Leslie 122. The CV and BV, as I understand it have a different foldback making the lower end more heavy. I have had three B-3s but neither have come close to sounding

Norm, Can you set me up with a 138kV line transformer for my CV? Thanks. :) Raul

In a message dated 02/21/2002 2:41:56 PM Eastern Standard Time, bottomline@... writes: << Now is my question what will i need excactly to add foldback to my l122? This is what I could figure out: