开云体育

On 3/21/2025 8:18 PM, Mark A. Stevens via groups.io wrote:

Hi folks!
If you don't know what it stands for, you are only an acronym behind me:? Interactive Problem Control System.
Did anyone ever use IPCS?

Yes, I did use IPCS when I was working on these systems.

Does anyone still use IPCS?

I don't WORK on them anymore. I might use IPCS if I start PLAYING with these systems again.

Do we need IPCS?

I think Amdahl had its own dump analysis program (ANALYZE ?). If that is available, I would look at that.

?... Mark S.

Tom Kern

On 03.18.2025 10:50, Zane Healy via groups.io wrote:

My preference for running something like Hercules or SIMH is a Virtual Machine running on an older x86 box with Linux installed. Log in, start up ’screen’ and then start up the emulator. I’ve used a Raspberry Pi for Multics and MVS in the past, but find Virtual Machines to be more convenient. I prefer to run OpenSUSE on the VM, but have also used Ubuntu and Red Hat.

100% agree. I always use Debian for servers and have switched to tmux
instead of screen, but yes, this is how I run all of my Hercules and
simh instances -- Debian VM on my VM server with tmux sessions for each
Hercules (MVS 3.8 / VM/370 / etc) listening on a different console port.

Question, has anyone looked at using Proxmox for this?? I’m looking to migrate my home lab off of ESXI, due to the cost.

Yes. Early this year I made the switch to Proxmox on my VM servers after
a decade of ESXi. Very happy with it.

ONE IMPORTANT TIP, though: I always set the VM CPU to "host" instead of
the default (x86-64-v2-AES) when creating new VMs. I don't have a
cluster of Proxmox servers where I need to worry about live-migrating
VMs between hosts with different CPU models, so it always seemed like a
good idea to me to just pass through the real CPU to VMs instead of
having QEMU fake a specific CPU.

It turns out the *one* VM I accidentally forgot to set the CPU to "host"
when I created it was my mainframe VM that runs all of my Hercules
instances. I was having an intermittent problem where my MVS 3.8
instance wouldn't IPL -- it just hung forever shortly after the IPL
started. No Hercules crash, no errors...just stopped making forward
progress. After a lot of troubleshooting, I eventually realized the VM
CPU was set to x86-64-v2-AES, not "host". I changed the CPU model of
the VM to "host". Sure enough, the intermittent IPL problem went away!
Hercules has been reliable again after I made that change.

-Matthew

Dave Wade wrote:

[...]

To me this is more "bloatware" with feature such as IEEE
floating point, 31 & 64 bit code, various network interfaces
and pile of other stuff I don't use.

I understand perfectly. In fact, this so called "bloatware" issue that SDL 4.x Hyperion currently suffers from with respect to older legacy operating systems (which I honestly believe is a rather unfair characterization of the issue) is what I believe ultimately compelled Jay Maynard to create Aethra in the first place. (Jay? True?)

Jay wanted a more modern version of Hercules with the all of the known 3.x bugs fixed, but without all of the code necessary to support all of the features and functionality that legacy operating systems didn't really need. Essentially, he wanted a SDL Hercules 4.x Hyperion "Light" version of Hercules designed exclusively for older legacy operating systems (i.e. a "bloatware-free" version of SDL Hercules 4.x Hyperion). (Jay? Yes?)

I would really like a smaller lighter Hercules for use with
legacy operating systems..

Have you tried Jay's Aethra? Because I believe that was one of his goals -- if not his *primary* goal -- with creating Aethra.

Your choice.

(but I know which one *I* would personally prefer!)

Yes but you aren't running 370 code on a PI.

Correct.

And I'm also not running legacy operating systems either. I'm running modern "Z" operating systems, largely because there is a rather large non-insignificant demand for such a version of Hercules.

If I was an ordinary Hercules user instead of a Hercules developer, I would probably prefer the same version of Hercules that you are preferring, but without the bugs. In other words, I would probably be running Aethra for my heavily modified personally customized version of DOS/VS (and VM/SP 5 if I could ever find a copy).

p.s. You still haven't "irked" me yet, but you seem to be heading in that direction! ;-)

--
"Fish" (David B. Trout)
Software Development Laboratories

mail: fish@...

On 19/03/2025 21:27, Fish Fish via groups.io wrote:

Dave Wade wrote:

BlameTroi wrote:

[...]

I'm wanting to rebuild my first serious shop in my home:
VM hosting DOS/VS. I see that there are Hercules Aethra
and SDL Hercules versions. Is there any reason to prefer
one over the other for running VMCE?

I don't believe for any of the 370 based OSs such as VM/370 R6
which is the base for VM/CE there is any difference. In fact
at the risk of irking Jay and Fish I would say that on a PI
one of the 3.X releases might work better as they are a little
lighter.

While it's true that the older 3.x releases of Hercules are certainly faster than the SDL 4.x Hyperion releases, they are also buggier, failing to pass more than one of SDL Hyperion's Quality Assurance tests, producing either incorrect results or outright crashing. I would personally not recommend using it for that simple reason alone.

As far as I know, Jay's Aethra is supposed to be identical to a current SDL 4.x Hyperion version of Hercules, but without many of the modern more advanced z/Architectural features that newer more modern "z" operating systems need/require, but which older legacy operating systems such as VM/370 R6 have no need for, thus making it slightly faster than SDL 4.x Hyperion. (How much faster, I have no idea. I've never bothered to try measuring it.)


So, to summarize:


* 3.x: buggy. Not personally recommended.

* Aethra: same(?) as SDL 4.x but without the
unneeded modern z/Arch features, and thus
*possibly* faster than SDL 4.x Hyperion.
(But its speed advantage(?) -- if any --
has never been measured as far as I know.)

* SDL 4.x Hyperion: the most current up to date
and recommended version of Hercules designed
for BOTH modern z/Arch operating systems AND
older legacy operating systems as well, but
slower than Hercules 3.x. (Not sure about
Aethra as I never bothered to measure it.)


So you have to ask yourself: Which would you personally prefer?

To more quickly arrive at *possibly* the wrong answer? (3.x)

Is the 370 emulation really buggy if you disable the assists?

Or to more slowly and more confidently arrive at the right answer? (SDL and probably Aethra as well)

To me this is more "bloat ware" with feature such as IEEE floating point , 31 & 64 bit code, various network interfaces and pile of other stuff I don't use.
I would really like a smaller lighter Hercules for use with legacy operating systems..

Your choice.

(but I know which one *I* would personally prefer!)

Yes but you aren't running 370 code on a PI.
Dave

Dave Wade wrote:

BlameTroi wrote:

[...]

I'm wanting to rebuild my first serious shop in my home:
VM hosting DOS/VS. I see that there are Hercules Aethra
and SDL Hercules versions. Is there any reason to prefer
one over the other for running VMCE?

I don't believe for any of the 370 based OSs such as VM/370 R6
which is the base for VM/CE there is any difference. In fact
at the risk of irking Jay and Fish I would say that on a PI
one of the 3.X releases might work better as they are a little
lighter.

While it's true that the older 3.x releases of Hercules are certainly faster than the SDL 4.x Hyperion releases, they are also buggier, failing to pass more than one of SDL Hyperion's Quality Assurance tests, producing either incorrect results or outright crashing. I would personally not recommend using it for that simple reason alone.

As far as I know, Jay's Aethra is supposed to be identical to a current SDL 4.x Hyperion version of Hercules, but without many of the modern more advanced z/Architectural features that newer more modern "z" operating systems need/require, but which older legacy operating systems such as VM/370 R6 have no need for, thus making it slightly faster than SDL 4.x Hyperion. (How much faster, I have no idea. I've never bothered to try measuring it.)


So, to summarize:


* 3.x: buggy. Not personally recommended.

* Aethra: same(?) as SDL 4.x but without the
unneeded modern z/Arch features, and thus
*possibly* faster than SDL 4.x Hyperion.
(But its speed advantage(?) -- if any --
has never been measured as far as I know.)

* SDL 4.x Hyperion: the most current up to date
and recommended version of Hercules designed
for BOTH modern z/Arch operating systems AND
older legacy operating systems as well, but
slower than Hercules 3.x. (Not sure about
Aethra as I never bothered to measure it.)


So you have to ask yourself: Which would you personally prefer?

To more quickly arrive at *possibly* the wrong answer? (3.x)

Or to more slowly and more confidently arrive at the right answer? (SDL and probably Aethra as well)

Your choice.

(but I know which one *I* would personally prefer!)

--
"Fish" (David B. Trout)
Software Development Laboratories

mail: fish@...

开云体育

I am running 6 old OS'ses on a Raspberry Pi 5 with 8G - including Multics. All over Tmux and ssh tunnels. Working great.

On 18/03/2025 16:36, BlameTroi via groups.io wrote:

This may be a dumb question, but I couldn't find anything helpful after searching here in groups and generally on the web.

I'm wanting to rebuild my first serious shop in my home: VM hosting DOS/VS. I see that there are Hercules Aethra and SDL Hercules versions. Is there any reason to prefer one over the other for running VMCE?

I don't believe for any of the 370 based OSs such as VM/370 R6 which is the base for VM/CE there is any difference. In fact at the risk of irking Jay and Fish I would say that on a PI one of the 3.X releases might work better as they are a little lighter.

From my reading a while back, MacOS security is a pain in the butt for Hercules and some other software.

I am not a Mac guy, but I think this is only a problem when running post 370 operating systems which have network interfaces....

While I'm a Mac guy these days, I have old but Windows 11 capable Intel boxes and a few of the various Pi boards, including a 4, available. Are Pis sufficient for VM and possibly DOSVS?

I haven't run Hercules on a PI for a while. Its slow, I believe it gives a similar performance to 4331/4341/4361 class machine. Give it a try..

Thanks.

Dave
G4UGM

开云体育

On Mar 18, 2025, at 9:36 AM, BlameTroi via groups.io <blametroi@...> wrote:

This may be a dumb question, but I couldn't find anything helpful after searching here in groups and generally on the web.

I'm wanting to rebuild my first serious shop in my home: VM hosting DOS/VS. I see that there are Hercules Aethra and SDL Hercules versions. Is there any reason to prefer one over the other for running VMCE?

From my reading a while back, MacOS security is a pain in the butt for Hercules and some other software. While I'm a Mac guy these days, I have old but Windows 11 capable Intel boxes and a few of the various Pi boards, including a 4, available. Are Pis sufficient for VM and possibly DOSVS?

Thanks.

Mark A. Stevens <marXtevens@...> added folder /RSCS_Assistant

Description:
A couple of EXECs to set up the access order and build RSCS with or without Peter Coghlan's mods. Two formats a zip of an AWS tape, and a VMARC file.

The following items have been added to the Files area of the [email protected] group.

• /hrc422ds.vmarc

By: Ross Patterson <ross.patterson@...>

Description:
HRC422DS NUCXTEXT occasionally causes DMSLIO109S VIRTUAL STORAGE CAPACITY EXCEEDED See https://github.com/s390guy/vm370/issues/131

replace the * (asterisk or star symbol) before publibz with a forward

> slash /

That's got it. Thanks, Gonzalo.

De

Is the above mangled from what you sent? IA gives me a "No URL has been
captured for this URL prefix" error. (I live behind a $%^*&
"protection" system, i.e. URL destroyer, sigh.)

De

开云体育

I googled 1fc5g101 and got this URL as first hit. So I guess there are ways to find them anyway. Looking for the Erep Users guide gives the URL as well, though that wil give ifc5g103.

Funny part is that if you go to epub/pdf/ it gives a forbidden result so you do need to specifically enter the full url of a book.

Regards, Berry.