开云体育

Hi Robert Firstly, Welcome & Thank You for joining the group. The G8JCFSDR works very well under W10Pro - that is exactly my configuration - without any "tricks". BUT, try setting the compatibility

I have installed the software on my WIN10Pro - 64bit machine. Opened up Config and selected ElektorSDR, went to Audio and setup appropriately for my machine, went to I/F and selected Com3 (which is

Hi Dave I Googled the T480, and it's certainly an impressive machine (although really heavy imho !!), I can't remember which Thinkpads we were issued with when I was working over 15 years ago, but I

Very good hint, Dave! I agree...

Peter, Yes that machine sounds like a great buy. Almost tempted to buy one to mess with but I have too many already. Glad you appreciated that. The T480 I have is a bit of a crossover machine. So its

Hi Dave This particular Lenovo is definitely Consumer grade, and indeed aimed at the very cost-sensitive end of the market. I must admit that I was gob smacked at how much computer Lenovo has managed

And if you don't mind German as shop language pollin.de. Special items, electronic spare parts and amog these refurbished articles, refurbished or even new laptops, desktops and monitors.

Hi all. If anyone needs a Pc or a Mac, check out ''refurbed.com''. There are many good deals! Enjoy.

Peter, That’s great it works, but I will comment on the “Lenovo” branding. They really make two ranges, the consumer devices which tend to be cheap and cheerful, and the “pro” or

Happy to read from you that everything is running. Was a good idea to dedicate a W11 machine for your SW. FYI now my system is working again properly, I definitely solved my problems with your kind

Hi Massimo's recent post about his problem with the G8JCFSDR &Windows 11 got me thinking, and since I didn't have any kind of Windows 11 machine at all, I went looking for the cheapest way of

Sorry to hear this. My condolences, Oleg. 73

Hello, i very sorry, but 8.11 Boris (ua3dnd) was died. I am son of him - Oleg. If you have any questions, please write me by email o.nikolaev@... Best regards from Russia, 73 24.11.2022, 03:25,

Hi Ralf A 32bit W10 laptop sounds like a very good candidate for a dedicated G8JCFSDR SDR machine. ie clean the machine of everything else, then? install just the G8JCFSDR. The main benefit of the

Good evening dear Peter, i`m sure you are right The teensy system makes no sense. I have no furhter use for my old hp-compaq 32 bit laptop with win10, that cannot be upgraded to

Hi Ralf The Teensy 4 is a LOT MORE POWERFUL than the Teensy 3.1/3.2 I used, so can do an awful lot more, eg drive a high resolution display. The reason I gave up on the Teensy 3.2 SDR, was that the

https://github.com/DD4WH/Teensy-SDR-Rx I found this online as I plan doing the same. Also Keith's sdr and or t-41ep project.

Hi Peter, thanks a lot for your help and the information. There is a new Teensy 4.0 on the market, approx. 24,- $ and the Audio Adapter 14,- $. The older Teensy 3.xx seems to be no more

Hi Ralf I don't think the Arduino UNO has the performance to carry out the DSP required to demodulate, AGC, etc of the IQ signals. I did experiment a couple of years ago with using a Teensy 3.2,

Hello, my dears! After a long break, I re-enabled the elektor labs SDR. Everything works fine on the PC, but I want it as a stand-alone. My question to the group: Has anyone ever operated the SDR with