开云体育

Hello to the group,It looks like the filter can be stacked,I have the 500hz CW filter not installed it yet ,but it looks like the Side Band filter could stack on it .Wonder what would happen it put in

Also, the way I checked the antenna was with a MFJ-259B, a pl-259 to bnc connector on top of the unit with no counterpoise connected to the MFJ-259B. 73's again Lee/k3re

Hello, this may be of help. When I purchased several types of whips in the early days, the Tokyo Hy-Power 40 and 6 meter coil. Also the 40 and 17 meter mono band AT whips, they were a little high at

I also get good audio reports with the stock mike, but I get much better reports on transmit using a mike that can be tailored for my voice quality. This is especially true when on FM.

Hi all, Bought a ft817 while I was in the USA, now I am home I am trying to sort a antenna that a can pack in my suitcase for next time. Has anyone tried using two atx antennas joined as a dipole and

Dave: That is exactly what I needed. Did not know there was some sort of removable tray for the AA batteries. On another note, I assume that when unit is powered from a ext 12v source that there is

-Been trying to use the ATX,(connected to the rear coax with Radio Shack adaptors) connector of the 817 on the beach in SC. Yesterday, worked Brazil on 10m, but still get several SWR bars (4 or5)

Barry, if you have a computer with a soundcard, could you please run receive audio passband plots of the 817's two ssb filters? It's really quite easy to do. Please see

Hi Stephen, Next time try to get the counterpoise up off of the ground/grass a couple of feet and I believe you will be surprised at the improvement. [You might have to stand up to keep the

I read about others having success and fun with the FT-817. The only thing that has changed about my setup is that I now use the FT-817 instead of my htx-10 and FT-620b. Obviously the power levels

not ATX Admittedly, this was on rx. However, since the antenna is passive, it would be going against the reciprocity theorem would it not if the same were not to be true on tx too? Also, I did not say

Buy NiMHs, make up pack, cut green wire, insert pack into compartment, keep drycell tray for resale day, charge. That's it! David

Is that 2 s points on Rx or Tx? I think the ATX works well on Rx, just not so hot on Tx. You'd have to make me swill a lot of beer to convince the ATX was in the same game as a dipole! David

Tha rig comes with the battery facilities for AA batteries. What is necessary to change to Ni Cads. I plan to pick up a rig in the next day or so and want to get everything correct from the start.

This afternoon, W3PM and I performed a few tests on the Yaesu optional SSB filter. We are located about 5 miles LOS and operated on 10 M with signals at S-8 to S-9. Qualitative observations by Gene

Me too. Most folk are very impressed at the FT817 audio - I would never switch microphones. David

Julian, I think for us UK based mortals a second hand gf roach pole is the best option, don't you? David

I agree Julian. Had an excellent qso today sitting in the garden, with a French station on 20m, and had a most complimentary report on the audio quality, without me asking. I'm using the standard mic

One of the (many) things I mean to do sometime, but haven't yet, is to play around with different upper and lower masts for the MP-1. It's incredibly easy -- you can get 36" and 48" pieces of 3/8"

I have had unsolicited reports of excellent audio using just the stock Yaesu mike. Julian, G4ILO