开云体育

Glad to hear it worked.

TNX a lot. It works. 73 Pietro (via Tablet)

Dan, Very nice user interface and Shuttlexpress integration :D btw take a look at WWW.VE2DX.COM ( /g/ft817/topic/WWW.VE2DX.COM, ) Got really nice FT817 and IC705 bluetooth CAT

Thanks a lot. I'll try the trick. Pietro I2OIM (via Tablet)

I made an adapter that I use with a Heil headset and also a computer headset. If you look at the mic pin connections in the 817 manual pg 5. Pin 4 is the mic audio input and you need to install a 4.7k

Is there any OM who can tell me the specs of the microphone to use with the 817? I'd like to use my headphone set, but I can't have any modulation I put the headset output to the standard microphone

You can try my app too, named jAReC (the new v4 version), that can be run on Windows, Linux or Mac. FT817 config file is already available. https://www.yo3ggx.ro/soft.html In v3 compatibility mode can

CatRadio is the new free software to control rig via PC. It uses the Hamlib libraries and supports many models and functions. Please download here https://www.pianetaradio.it/blog/catradio/ and

Hello Gang, Here are my new Acrylic Call Sign Displays, with Dual LED Zones and FT8X7 Bluetooth interfaces. Drop-in to WWW.VE2DX.COM or contact me at ve2dx@... if interested. -- 73 Richard

Nice report. I am now curious on how to perform such measurements. I looked up the charger and read the manual. It still left me with lots of questions. Is there a guide you can recommend on how to

Frank, This is a good idea to replace the dead or missing original battery pack. Tell me how you bundled the batteries and connected the cable. DEan Sent: Thursday, February 3, 2022 12:14 AM To:

On Wed, Feb 2, 2022, 5:55 PM simon <simon@...> wrote: > Finally got around to testing some internal battery options for the '817 using > the common B6 mini charger. > > I have been using

Finally got around to testing some internal battery options for the '817 using the common B6 mini charger. I have been using Panasonic Eneloop Pro (black) batteries for casual operation for a year.

And the unit is sold (pending receipt of funds).? Thanks for looking!

Thanks Steve, Appreciate the GREAT feedback! This is actually an extra unit sent by error to Steve, my bad... -- 73 Richard VE2DX Lead Designer and President WWW.VE2DX.COM (

I have an extra brand new unopened package blue tooth CAT interface , a YC1-BT VE2DX unit.? (I'll open and send photos if you insist).? See www.ve2dx.com ( http://www.ve2dx.com/ ) for full specs.

Hi Zack, I have done this mod to one of my 817s to operate a transverter, works well. Soldering the +5V takeoff to the board is a bit delicate, but there is plenty of room.

The FT857 mod that I have involves finding a line that has a voltage present on transmit, adding a resistor and a capacitor in a certain place in the transmit output chain and connecting the switched

Zack, I don't know what the inside of an FT-857 looks like the FT-817/818 has the antenna select relay right next to the front connector.? I doubt there is much room in there for the introduction of

MFJ sells modules for adding DC to an antenna coaxial cable.? Basically AC couples the RF to the coax center thru a capacitor, applies the DC to the center conductor thru an inductor and has same at