开云体育

Col, You have done everything I would suggest except to use a dummy load instead of the antenna.? I have read a few issues where it appeared the antenna select acted opposite.? That is when the

snips Hullo Col, Sri to hear this. I re-read to ensure antennas were used for all tests. Useful to hear it appears there is fold back/protection going on. The PA is essentially all-band, so no

G’day all, I have been a reader and lurker in this group for a while and this is my debut post! After a good few years of use and abuse my 817 has decided to give me a high VSWR reading on the 2m

Hi Or FLRIG a free down load and a simple Google search will get the web sites for download. Marty kd8bj

Although this sounds a little ominous, it could be simple.? Have you tried a factory reset for the software?? Hold the Home button down while turning the radio ON.? this resets everything in the

I second Dave's suggestion of trying a software program to test rig, you could also use N1MM, https://ft-817-commander.software.informer.com/, http://www.ka7oei.com/ft817_meow.html -- *Anthony Luscre*

I'd consider sending it in to Yaesu. I recently (a year ago?) sent an older radio to Yaesu that wouldn't power on. Paid to ship it to them, they evaluated the radio, determined it needed a main board

If you have the cables for digiital interfacing and access to an old copy of Hamradio Deluxe - you might be able to make use of it by using HRD as an external control interface. Also FLRIG may give

I think it was an attempt at humor. I would try exercising all the switches/buttons multiple times. Often one will get stuck on. That might save taking it apart, ie. opening the front. Good luck. 73,

Hi Don, Why would Icom bring it back to life when it’s a Yaesu machine? 73….Eric VK2VE. Sent: Thursday, 3 March 2022 11:37 To: [email protected] Subject: Re: [ft817] buttons don't work Icom will

Icom will bring it back to life...

Might be stuck button.? Normally in these rigs the buttons are in a matrix configuration and scanned by the CPU.? If one button is frozen pushed it can lock out the other buttons. One solution also

Well - my 10 year 817 may have bitten the dust. Most of the buttons don't work. It powers on but is stuck on 446mhz. the selection knob changes the frequency in the 440 band but that's it. I condany

I bought the original MW some years ago for my FT817. I thought it works very well for receiving on the HF bands. Never used it for? VHF / UHF or much transmitting.

Thanks for the info. 73 Jerry, ki4ps

HI Jerry: From what I recall, the MW was designed to mate with the FT-817.... so you're good for 5 watts. 73 de RayK2ULR

I have the one from Canada and use it on my FT-817nd. I use it mostly on receive. HOW much power with the MW take? Jerry ki4ps

Hi Group, Where can I locate actual build instructions on this antenna??? These look interesting and I need to get something in the air to use. Charlie'KA9HDG

I worked MIami to Iowa on 2.5 watts on 17 meters with a Miracle Whip… It does work. Jeff AF1J