开云体育

Nick wrote: I am using PSK-U here. I don't use the narrow filter so the frequency shift is not a problem. I guess I will change to user-u when the need arises to use the narrow filter. There are 2

I have been using the ATX Walkabout 3/8-24 thread base with the SuperAntennas FT-817 Mount. I'm happy to report this combination is much more durable than my other ATX Walkabout BNC mount, even

Thanks for the ton of emails on this hf amp...it has been sold! Thank you. Mike

Today while browsing at R&L Electronics near Cincy I found an adapter made my Workman Electronic Products that is a right angle SO-239 to 3/8-24 female thread. Model # SM-1L. So, for those who want

Steve Howell wrote: Steve and others, This is the method I am using, listening via the laptop PC speaker. I can still control the rx audio without affecting the soundcard audio when the PC speaker

smbertuzzo@... wrote: Actually Serge, I deduced this fact from the same problem you had. When the 817 is in digital mode, I had no PSK tones coming from the transmitter and no RF output. WHen I

jrevans@... wrote: I tried to find this thread in the archives and never did. If using USER, are there any other adjustments to be made? What is the difference between USER-U and just using

kr8l@... wrote: Bill, Thanks for all the info. I made my first PSK QSO with the SGC2020 and Rascal interface, made several after that. I then opened up the Nomic interface, arranged the

by Steve and others) that you can connect your sound card output to the microphone input. I imagine that means that the headphone output has to be used for the sound card input, so that you can't

One advantage of this is that any incidental "hootin' and hollerin'" that goes on in the shack is NOT transmitted, via SSB, on the CW/DATA portion of the band. (One hears this occasionally. Of

He is, in fact, correct; in digital modes, the '817 expects the audio at the rear DATA connector. I don't think this is explicitly stated in the manual. You can run digimodes from the regular

Off topic. In English law, it is "Fitness for purpose" Ken Ashcroft

from Din at

Nick, I saw your post and thought I would respond. I was under the impression that if one used an interface like the Rigblaster etc that you did not have to use the acutal data connector for digital

Is there any reasonable CAT software out there for the 817 yet? anyone using any Richard G3UGf

Those fine, quality-oriented folks at MFJ (cough cough) also were carrying the ATX. Had plenty of 'em at Dayton, but they wanted ~$160 vs. others @ $99. Just in case someone is desperate. As a

In the infamous words of Leslie Nielson, "Yes it is, and stop calling me Shirley!" :) I know, hard to believe, but it is, in fact, a press fit. Very tight, though, on mine -- as said, I needed a

Joe Reed <joe@...> wrote: Yes it does, on the side. It may be switched for either external speaker, or headphones. sort of headphone jack on the rig. Can't tell from the specs. If so

I've used it for casual listening, mostly on 19m, and have found it acceptable. I should comment that this has been mostly while mobile, on occasions when I couldn't stir up a QSO on 20m or 17m.

The ATX Walkabout may be available in the U.S. Every once in a while a receive a complementary copy of Worldradio. I received one a few weeks ago, and finally got around to looking through it