开云体育

I have had the same general observations, but last night I discovered something new. I was playing around with my new '817, and had the rig sitting on the desk, with the "long" duckie connected

I suppose there are many configurations that will work. But here is one that I know works. I have a 15 meter dipole (approximately 23 feet overall length) center fed with home made open wire line

I like to create a randomwire antenna for use with my FT-817. I first created a dipool antenna fed by a 50ohm coax. This was good enough to make my previously announced "First Contact". I now have

Nope, with the 20 meter Maldol mounted directly on the FT-817, I get 4 to 5 bars in on the SWR display and have been completely unable to adjust that or make a contact with it. Mounting it on the Z11

You could also look at RM products in Italy. They do CB (25-30Mhz) amplifiers , but also VHF and UHF and some have HF capabilities. Power from 30W-to 500 Watt with 1-7W input. Look at model KL203

OE3MZC: The reason for the SG237 Smartuner to start the tuning process again might also be an old software in the EPROM of the 237! You can write to SGC and ask for a new version that makes the

My dealer in the Netherlands (Schaart Communications - http://www.schaart.nl ) replaced my FT-817 - no questions asked! So I am back on the air, but very careful! Rene PD1ALD voltage

I just got the message from Verne, that he shipped my order. As soon as they arrive QRPproject is able to ship MP1 MP1-TRPD, the Tipoid foot FT817MKT, the special FT-817 mount Mobile Kit for mobile

HI I enjoy reading about the ft817 I bought one how ever you put the information about it on all my emaile addresses I cant aviod it every were I read email there it is every thing I joined o

Rami oh6bi wrote: Rami, we have an American English translation problem. I think monophones are not monophonic headphones. Please tell us... What are monophones? Here are some American English

gir

is me me who is me the cats ass --- bringmethecatsass@... wrote: __________________________________________________ Do You Yahoo!?

If you select headphones, as opposed to SPK on the little switch by the jack you get mono in stereo headphones. Quite a clever trick Pres Waterman W2PW c/o Patchogue Motors, Inc. Long Island Ford

There's a gold-plated version, RS # 274-882, that may have superceded the cheaper model. Of course, I think this is all moot, since my radio doesn't require an adapter, Also, the original inquiry

I went to my local RS store to buy just the adaptor you are describing and was told it was discontinued. Julio

I've tried mine. Stereo phones work fine. Sound in both ears. I just tried again with three different sets of stereo headphones. Maybe it's a model change? Mine's serial # 1D250091. Does your

Negative, although only the new version of the BM-10 is listed on the Heil website, they are making the BM-5 too. Just took one off when I left the shack. :^) Very light and convenient with

This is not worth an argument, so let me just say that my manual shows the headphone/speaker connector as tip/sleeve and only one channel is active if I plug stereo 'phones into the radio. So, try

I don't have the One Plug Power battery unit but I do have the One Touch Tune unit and it is built to last and does what it is supposed to do. In fact it does it very nicely. Not having to struggle

No adapter needed. If you look at the schematic, you'll see that the jack is wired to accept either mono or stereo headphones. And if I understand the original question correctly, the answer is