开云体育

Julian, It's OK to drill a hole in the steel tape, and attach a screw, nut and star washer to make contact. It works, too. Cortland ka5s

internal path and timer settings. Many thanks for the clarification & confirmation. Rgds David

You just have to understand the Gravity of things in the UK. ;-> David

By the way for those who don't know, the radio Shack roll up is designed like a very small chalk line reel. works the same. cheers, sas

Bill: Barry W4WB confirmed that the battery can be charged via the normal internal path and timer settings. Elliott WA6TLA Bill Gerth wrote:

Surely you can find some lighter than 70 pounds. man that is heavy for an ant.. HEE HEE just kidding....

Hi Folks, This may sound odd, but I'm have been bitten by the QRP bug. Could someone please tell me who makes the HL-50B amp & what is the URL of where I can buy one? 73, Fil, W8FIL Mike

1. take a chalk like which has a geared reduction take up spool. 2. get some small gauge, Teflon coated wire, (very slippery, one can easily UN-knot it) 3. diss-assemble the chalk line. 4. discard

Hi Julian, It is a trade off for Convenience. You are right, It will be a different length than a single wire, due to what's left coiled up in the holder(inductor.?). But.. Once you have found the

Pro-Am do a whip with 4 top loading coils covering 10, 15, 20 and 40 I believe. Two of those back to back would make a nice 4 band dipole I should think, although as the whips are 100 inches tall it

Another antenna support option is a replacement fiberglass tent pole. I got 1 at Wal-Mart for about $6. It's about 8' long, held together by a shock cord run thru the center. It has aluminum couplers

insulated have a don't know this ) It might work on the lower bands (I used a coil of wire to shorten the standalone 40m counterpoise for the ATX, as detailed in Monday's posting) but the problem

We probably need to get the designers involved here. I'm only a potential customer hoping to pick mine up at Dayton. However, in the meantime, here is my take on the charging question: Since the

With this (and the chalk line reel the purpose of which I can't for the life of me figure out) won't you need to use bare wire? otherwise as you reel it out you'll get a lengthening counterpoise

I posted them in a message to this list on Monday. Julian, G4ILO

No mention of it on the site. Even orders to AK, HI, PR and VI (wherever they are) must be done by phone. Julian, G4ILO

supply. Hello Elliot, Apparently not. You can only charge the New pack through it's own New connector. So you need to buy/have a charger,and still have a PSU also. Rgds David

Hello Fil, I have 2 "12M" Hamstiks being delivered today for that purpose. I bought a regular 3/8 adapter, and a SO239 - 3/8 from RS. They are already mounted on a Aluminum L bracket ready to

Julian, G4ILO wrote: I almost bought the radio shack antenna until I realized it was insulated wire. I guess that if it is only partly unwound, then the end will have a coil on it. I wouldn't want to

David, The purpose of the new jack on the new door is strictly for charging, not to power the 817 from an external source. The rear deck external power connector on the 817 already does that. The