开云体育

Hello all! I am selling my Yaesu FT-817nd. It works great, but it's taught me that I don't enjoy 5w HF SSB very much. I'm also selling my LDG Z-817 tuner which I did not use more than two or three

ps... I no longer have the 817 or its clone cable But WHAT IF ?the difference is only drivers See image for? drivers n3aaz

Clone memory frome 817 to 818 It has been a while so I don't remember how or why I know this but the 818 requires a different cable between it an Chirp This (image) solved my issue 72

Hi, switching the FL-110 via the ptt line is drawing quite some current. If I remember it right, it is arround 100 mA. To check, just put a amperemeter in line and ground the contact. This may be a

Hi Pietro, I too had an issue with instable power and swr with my FT-817, which took me quite some time to track down. The final unit has some kind of gray shielfing foil on top. With the shielding

Ah. Memories weren't mentioned, hence the confusion. J Sent from AOL on Android On Mon, Oct 21, 2024 at 10:38 AM, Ken N2VIP<ken@...> wrote: Joseph, The OP isn't talking about upgrading

Joseph, The OP isn't talking about upgrading from FT-817 to FT-818, he wants to clone memories and settings from one to the other. If he were considering an upgrade from one to the other, there is the

I was unable to directly clone between an FT-817 "unmodified", and an FT817 "modified" i.e. "wide-banded" radios. First I downloaded a data-file from the target radio and populated it (copy and

Is there really that much of a difference between the two models to be concerned about an upgrade? Joe N1KHB? Sent from AOL on Android On Sun, Oct 20, 2024 at 1:47 PM, Tobias

There is also FT-817 Commander, I don't know if it works on the 818. Chirp should work though.

I would suggest using Chirp. A direct clone may not be possible due to hardware changes. Chirp works very well with my 817ND, just follow the instructions in software. 73 Kevin Mullens K5KTM

Note that RT Systems shows a different product to program the FT-817 than for the FT-818. On models that have identical systems, such as the Yaesu FT-897 and FT-837, they sell the same program, in the

G’day Leicester, Good question, wish I could give you an answer! Perhaps the 817 and the 818 are just different enough that a clone from one to the other won’t work? Maybe another approach like

Sent: Sunday, 20 October 2024 4:28 PM To: '[email protected]' <[email protected]> Subject: Clone FT817 to FT818 Hi All, I'm having trouble trying to clone a FT817 to a friend's FT818

As a reminder, Yaesu shipped the FT-817, FT-817nd, and FT-818 with not only a battery pack, but also an antenna collection (2m, 6m, and 70cm) and shoulder strap. They obviously viewed this as a

Pietro, Sorry to have been away for a few days.? I looked at your pictures of the display and the SWR does seem a little high.? The radio cuts back on power when the SWR goes up to protect the

Just like going to the dentist. Did Ali Express finally deliver? I’m hoping my battery pack gets her soon. We ordered our parts about the same time. Mike Davis WA1MAD

Hi were did you get them from in the end, Dave 2E0DMB wrote:

The radio doesn't want you to do surgery on it! LOL Ken, N2VIP

I got the pin diodes but suddenly, yesterday, it starts to work at full power. Astonishing, disorienting... I2OIM