开云体育

There is a problem with these connectors. I was using one and the connector got yanked while it was plugged in. It pulled the DC jack loose from the pc board. I had an awful time repairing it. Now the

The proper Yaesu part, EDC-6, is $9 https://www.hamradio.com/detail.cfm?pid=H0-002649 Power pole to 1.7mm is $10 https://www.westmountainradio.com/product_info.php?products_id=ppl-4 If you want

Mike, Thanks, your explanation answers my questions. Note: you seem to keep referring to the FT-817 as 718, which brings to mind a competitor's radio, the IC-718. Thanks, Ken, N2VIP

Do you mean the FT817? Not 718? Sometimes you just have to spend the money. I would stay away from the Windcamp adaptors. For one thing, I bought one and the plug into the radio didn't fit properly

https://www.ebay.com/itm/Yaesu-FT817-FT818-FT60-etc-power-plug-x3-/132534398706?_ul=IL sssnet.com@groups.io> wrote:

Hi, Ken, There is/will be a pigtail that runs from the conditioner to the radio. It simply was installed when these photos were taken. The active device is a low dropout adjustable regulator that

Mike, Looks nice, but I've got a couple questions: I only see one external connection, how is this unit connected to the radio? A jumper that passes thru the lid? I suspect most FT-817/818 users power

I use the Yaesu cable: I think it came with the radio. It also fits my Yaesu HTs. 73, Leon G1HSM

Hey, gang... Things have been slow in the shack, so I've raised from the dead a project I started back in 2018. This is a power conditioner for the 718/818. Unlike Phil's design, I can't remember

Hi Steve, The issue I'm having seems to be different, but close attention to your reply makes me wanting to expend some euros on a dummy load for further debug this. Meanwhile, I also engaged with

Hi, gang... well the subject says it all. I'm looking for the little coaxial power jack for the 718. I've searched Amazon and eBay. I don't want to spend $25 for a connector with a hunk of wire on

Hi Anaxi, I replied twice but the web page kept freezing towards the end of an extended post and I lost heart! It happens as soon as the radio is turned on. Connect mic only- all OK. Connect key

Any contact from a POTA park counts as a POTA contact.? POTA has no required exchange.? Whether you are doing POTA or FOBB just upload everything to the POTA web site. -- Mark AA3K

I’m still seeing such behavior on the IC-705 (different radio)... when on SSB/voice, randomly, when I press the PTT, I see the TX light on the amp, but as soon I say something the TX light turns off

*Flight of the Bumblebees is now just 1 Week Away. July 28 th is nearly here. 21JUL24* Bumblebee Number requests are still coming in. As of this morning, there are 166 Bumblebees signed up to go out

Hi Steve, Long time since no groups.io-thread-interaction ? That is a bummer... How often do you face this? Any clue of the scenarios (temp, uptime...) when it happens? Excellent tip, I'll try

Strange behaviour but it is familiar to me with my '818 and has been a nagging issue for several years, commencing about one month after the warranty expired. I key the supplied Yaesu mic. and the RF

Priced reduced to $15 + shipping which should be around $15.00 or so…

Hi, Just got this amplifier, the version with band sensing, and their cable kit for FT-817. Working conditions: - Yaesu FT-818nd (TX) -> Neptune 50W (AMP) -> Diamond SX600 (EXT. METER) ->

Based on some questions that ?I have received, I have added the following to the FOBB Rules on https://ars-qrp.com ( https://ard-qrp.com ) *POTA/SOTA OPERATIONS AND HIGHER POWERED