开云体育

Yeah - I am pretty good at figuring solar/battery. I have 2 kW of solar for the emergency power here. And at work I control 110 MW (not a typo, 110 MEGA-watts) of solar. Just as a note, my personal

Great idea with MFJ1317.?Never had any problems with Windcamps either. I made a 3" pigtail PP to PP to plug into the PP adapter in DC-in. Maybe redundant but eliminates any strain altogether.Portable

I like the Bioenno batteries, I think their prices are on the high-end of reasonable, but my 20 amp battery works great. To size the battery, you need to know how you are going to use the radio and

You can always use the wire-cutter on your needle nose pliers as a crimper.? I have done it quite successfully.? Just be gentle... Answering the original question: I use an external Bioenno brand

Believe it or not Randy, with over 3,500 adapters sold over the past 2 years, you are the very first person to ask for this.? But I will investigate it and hopefully do a short run. But it won't be

https://www.hamradio.com/detail.cfm?pid=H0-002649 Joseph, KD4RXP

AFAIK, there is no available store-bought adapter cable. If you’re determined to go in this direction, you’ll have to make an adapter cable yourself. Parts are available from several sources,

Hi All, The connector size is a 1.7 x 4 mm DC plug. I normally save them from universal DC power packs that come with a range of plugin DC right-angle adaptors. I then solder the power lead to the

Hi Randy That is one of the problems (there are others in my opinion) with the Powerpole adaptor. The suggestion by Richard at Sotabeams when I saw him at the Newark Hamfest last September was to cut

Harbor Freight has a general purpose crimper < $10 that works just dandy on pp connectors. Im all for good tools, but i also dislike expensive tools that only do one thing. Just sayin. Sonny n1khb

I have the pp for a ft817 power jack. I do not want to cut any cables. I am looking for an adapter pigtail so I can continue to use the charger. Can someone help me out? Randy ka4nma

OH…… forgot. I wire other batteries internally by taking the AA-cell pack and unsoldering the plug and wires, and attaching them to the new battery pack. I bought several AA-packs and cut the

Well, there are several ways to skin a cat. I prefer a basketball needle and compressed air……. Just sayin….. Internal battery: If you are not satisfied with the internal battery (and WHO

Hi, My recommendation and what I did. I have two pre made power cords. One has the plugs for the 827 and my LDG tuner and the other just for the radio. Both terminate to Power pole plugs. Get a

hi guys, this is my first post and i know this is going to be a basic question for you guys but until you tell me the answer i dont know, i got the 817 to go out and about with not much weight but the

Didn't someone come up with an improved version that allowed both the original and Anderson connectors to be used? Bo W4GHV

The cheapest and quite nice tool is KAI-200 by IW2NDH http://jackdev23.wixsite.com/iw2ndh-swr-analyzer 73 Jacek Hoffman SP5OSF

https://www.amazon.com/KKmoon-Shortwave-Antenna-Analyzer-Tester/dp/B073WWTTXC/ref=sr_1_7?keywords=antenna+analyzer&qid=1554577806&s=electronics&sr=1-7

Hi Ken Yes I have seen that site and I am considering it as a possible upgrade to my Rpi. Marty kd8bj

I am looking for a tenna Dipper or an inexpensive antenna anaylzer. We do have some trade items for an anaylzer. Randy ka4nma