Hi Ken
Yes I have seen that site and I am considering it as a possible upgrade to my Rpi.
Marty kd8bj
toggle quoted message
Show quoted text
On 4/3/19 8:20 AM, Ken Hansen ken@... [FT817] wrote:
Are you aware of the Northwest Digital DRAWS board? It is a Raspberry Pi "hat" that controls up to two radios via mini DIN 6 pin cables (two signal links on one Pi-sized board) and includes:
An accurate clock (sync'd via on-board GPS)
An on-board GPS for APRS and similar applications
A voltage converter to power the raspberry pi from 12v source
And comes with a raspberry pi 'image' (OS and apps) to do all manner of digital modes, both HF and VHF/UHF
It seems like a nice way to cut down the cable clutter when operating digital modes with raspberry pi.
Ken, N2VIP
On Apr 3, 2019, at 7:59 AM, marty mhartwe@... <mailto:mhartwe@...> [FT817] <FT817@... <mailto:FT817@...>> wrote:
Now what I have found is with the Rpi setup there are a lot of
individual pieces strung together.
