开云体育

Ah. Memories weren't mentioned, hence the confusion. J Sent from AOL on Android On Mon, Oct 21, 2024 at 10:38 AM, Ken N2VIP<ken@...> wrote: Joseph, The OP isn't talking about upgrading from

Joseph, The OP isn't talking about upgrading from FT-817 to FT-818, he wants to clone memories and settings from one to the other. If he were considering an upgrade from one to the other, there is the

I was unable to directly clone between an FT-817 "unmodified", and an FT817 "modified" i.e. "wide-banded" radios. First I downloaded a data-file from the target radio and populated it (copy and paste)

Is there really that much of a difference between the two models to be concerned about an upgrade? Joe N1KHB? Sent from AOL on Android On Sun, Oct 20, 2024 at 1:47 PM, Tobias

There is also FT-817 Commander, I don't know if it works on the 818. Chirp should work though.

I would suggest using Chirp. A direct clone may not be possible due to hardware changes. Chirp works very well with my 817ND, just follow the instructions in software. 73 Kevin Mullens K5KTM

Note that RT Systems shows a different product to program the FT-817 than for the FT-818. On models that have identical systems, such as the Yaesu FT-897 and FT-837, they sell the same program, in the

G’day Leicester, Good question, wish I could give you an answer! Perhaps the 817 and the 818 are just different enough that a clone from one to the other won’t work? Maybe another approach like

Sent: Sunday, 20 October 2024 4:28 PM To: '[email protected]' <[email protected]> Subject: Clone FT817 to FT818 Hi All, I'm having trouble trying to clone a FT817 to a friend's FT818 using FTBasicMMO with

As a reminder, Yaesu shipped the FT-817, FT-817nd, and FT-818 with not only a battery pack, but also an antenna collection (2m, 6m, and 70cm) and shoulder strap. They obviously viewed this as a

Pietro, Sorry to have been away for a few days.? I looked at your pictures of the display and the SWR does seem a little high.? The radio cuts back on power when the SWR goes up to protect the

Just like going to the dentist. Did Ali Express finally deliver? I’m hoping my battery pack gets her soon. We ordered our parts about the same time. Mike Davis WA1MAD

Hi were did you get them from in the end, Dave 2E0DMB wrote:

The radio doesn't want you to do surgery on it! LOL Ken, N2VIP

I got the pin diodes but suddenly, yesterday, it starts to work at full power. Astonishing, disorienting... I2OIM

Hi Tony, The current rating looks adequate though marginal.? Hopefully it will be RF quiet as well.? If you have RFI from it look into the Pro Audio Engineering Kx33, as far as we know it is the

Sounds like a good time, we should all come. Kevin Mullens

Splendid

From the user manual Current Consumption: Squelched: 250 mA (Approx.) Receive: 450 mA Transmit: 2.4 A (HF/145 MHz), 2.7 A (430 MHz) You're good to go. G4MAD

Hi, I have picked up a WhatsOn 3A Power Supply that plugs into the mains. Will that work ok with the FT818nd as it can deliver 3A continuous. Dont want to plug it in just in case without confirmation