开云体育

Measure the peak-to-peak voltage across a dummy load with an oscilloscope. -- Mike G8GYW

A swr meter aint gonna give you a power reading is it, its gonna give you a swr reading, unless you get something like a cross needle power/swr meter or the like, as for the mulitmeter, err i dont

Hello, Beside getting a SWR meter is there a different way to measure the actual power from the ft817? ?Could I use a multimeter? regard,

Hi, I personally use 4 Li-Ion cells and I get more than enough capacity to tackle mountain outings in QRP. with an excellent power/weight ratio. Since 4 cells produce a higher voltage than the

Thanks for the info Steve. Sounds like the way to go. Kevin Mullens

Kevin, The WindCamp Battery is Way OVERPRICED and one of the (3) 3000 Mah Cells will "Fail"even in conservative Use, I know I found it the Hard $ Way. Real 3000 Mah NickelMetalHidride Packs are

Well it turned out to be the battery. It’s been working well for a while (10 months or so) but didn’t have enough poot for the radio to recognize it. I ended up putting my much larger 12ah that I

Thanks John. I don’t have much use for the CW filters as I am an SSB op. Haven't used CW since my test haha. I think I’m going to skip the filter entirely. Doesn’t seem to make enough difference

Hi all. I am experiencing a weird situation, I apologize ahead of time as I am a newbie to the 817. When I plug in an external battery the radio is not seeing it. I have a car power adaptor which it

The only good filter is a cw one by Yaesu The Yaesu SSB filter is a bit better. qRP ARCI has an article on them and the graph showed some tighter skirts but I found it wasn't worth $279 Canadian for

At The Last Local? "Flea Market" I Noticed? TWO FT-817's one a ND and one a original? For Sale,? One? Full "Kit" on the "original" included all of the standard Items items even the whips, battery

I posted *two* (2) vendors. Page down and look for the vendor in *UK*. The *Collins 500hz filter* (w/o board) is showing up overseas but you must *search and evaluate reliability of the vendor*. I

There are a couple of videos on YouTube of them, one in particular has some halfway decent audio and I was able to hear a little difference. The mutants just sounded a little richer in audio. But if

The item you posted is no longer available. Clyde KC7BJE

Is there a way to implement the MAX4581 IC to use as the filter? Around $2 plus some passive components. Joe N1KHB? Sent from AOL on Android On Sun, Jun 16, 2024 at 12:34 PM, Gigu

OK. The internal Murata filter is CFJ455K-14 (6 Db bandwidth of +- 1.1 - +- 1.3? kHz). The boards available for around $100.00 are CFJ455K-13. I cant find a data sheet on the -13 filter but

What's insane money?? Collins? is supposed to be good stuff..

What’s the price difference? Gig N2GIG

The Murata filters are similar to the internal filter in the radio. Probably a little tighter bandwidth but not near as good as the Collins mechanical filters. I'm not sure what the filter number is

Understood but do they work well enough to make a difference? I’m working on a budget and people are asking insane money for the Collins filters, be they OEM or Inrad. Thanks Kevin