开云体育

*Anyone know where I can get a data cable for the? 817 to the Z-817 auto tuner? I have the assoc. cable but not the data cable. Any help would be appreciated. Thanks Dave NU4N*

Thanks for the information guys, I’m ordering a replacement charger from Amazon today.

I really wouldn't call that cheap at well over ?100, second-hand! Still, nice to know they're compatible.

Yes, the XF-115C is fully compatible not only with Inrad #705 board but also with SP6AB filter board. It is cheap and fully working solution for our 817/817ND/818ND… 73 - Petr, OK1RP

Hi everybody Just to let you know that according to the reply I received from Inrad, the XF-115C is fully compatible with their #705 pcb filter board. 72/73 de Vicen?, EA3ADV

hello, I have since a problem with one of my 2 FT817. in FM mode under 13.8 Volt I have 5 watts. in SSB I have a carrier when I use the microphone, as if I were on FM ... and the station comes out

This is the one I'm using: https://www.ebay.com/itm/132916132058 I thought I bought mine from a US seller, though. Might want to check further listings on eBay. I can't use the rectangular Windcamp

TNX!! Jim

Jim you can get the power pole and other things at POWERWERX.COM.

I have the SOTABeams version.? Works perfectly.? Haven't had to take it off since I put it on. Take care, Mark AA3K

WINDCAMP Anderson Power Adapter Connector to DC Plug for FT-817 FT-817ND FT-818 FT-818ND amazon.com https://www.thingiverse.com/thing:2625096 No personal experience with either. Ken, N2VIP

Where did you get that powerpole?? Sounds like a real improvement over those "coaxial" connectors. Thanks & 73, Jim wb4gcs@...

I cannot use one of these on my rig. A year ago a chip cap on the pc board power line by the power jack blew up and wiped out the trace. I believe it was a 0.1 uF, 16V cap. 16 volts seems dicey on a

Here is the exact replacement from Amazon.? I have purchased two over the years and they both work fine.? Somehow I misplaced the first one so that's why I bought

First of all I would like to thank everyone for their feedback and suggestions. It has been very helpful. The signal is real, and it is coming in the antenna on the 705. I used the RF Gain and ATT on

Hello everybody I joined the group just a few days ago after a good friend of mine handed over a FT817 as a gift. I would appreciate if someone on the group could advice if the case type and pinout of

Hi, please can you test without "Preamp" on the IC705? 73 Parice.

HI Pete, Do you have any HP or BPF filtering in the input of the 705? I am wondering if the 705 is doing some mixing with out of band signals? The spectrum seen on the 705 is certainly not clean,

Usually when doing harmonic test with a spectrum analyzer or spectrum scope in the IC705 if one adds attenuation to the signal and it does not change means one is overloading the scope and the

Glenn, Thanks for the assistance. I just tried that again to make sure I was covering my bases and with the 817 transmitting a tone in FM at 1/2 watt I can walk around the house with the 705 and a