开云体育

Steve, I've sent a couple of emails to Waters and Stanton without reply as yet. In the even that I end up using this ATX (with the BNC), I am assuming therre is a soldered joint at the RCA? Surely

If your purchased the MP-1 Tripod you can use the Tripod legs to lengthen the base section for the MP-1. All hardware is coupled with 3/8 x 24 thread. In a pinch you can carefully couple the sections

Richard, I ordered the PL259 version and Waters and Stanton sent me the BNC one. Waiting to hear from them what to do. I also think the PL259 has to be stronger. This is a fairly big antemma (looks

If this is true, then all the more reason to buy the W4RT "One Plug Power" instead! I received mine this week and am very pleased with it. It plugs right into the Yaesu harness, provides both over

For Sale.....only 2 months old..used 2 times....mint condition...directly purchased from Tokyo Hy Power...the HL-50B hf amplifier. Have power cable, box and manual...and no mod's ever performed on

the a the

Nick wrote: I purchased a Cat5 patch cable and a 6-pin Mini DIN (PS/2) plug. I cut the RJ45 connector off one end of the Cat5 cable and attached the Mini DIN plug in it's place. There was some

It would appear that the Klixon thermal breaker I found in the JVC 9.6V, 1000mAh pack is a custom item of some sort. Neither Mouser or Digikey carries anything remotely like it. For that matter,

would Yaesu and others state NOT to use any other cells than dry cells in their battery holder, or buy their ni-cd pack, so NO they would not be liable for you inserting re-chargeables and frying

zl1cdn@... wrote: I am using a RIGblaster nomic for my FT-817 to sound card interface. How do you connect the nomic to the data connector? Nick WB4SQI

kr8l@... wrote: And with this setup you get consistent PSK31 QSO's? I tried and never got an answer to any CQ's. The ALC was running 3 to 4 bars on the meter. Tones sounded good on

Hi, please read my earlier mail "ABNORMAL BEHAVIOUR OF FT-817 TRANSMITTER...". There you have the reason why Yaesu recommend using the ferrite core. The problem is however, this fix does not always

I just took delivery of a new MAHA battery pack model MH-FNB-72 yesterday and my information sheet states the same thing. I am also able to feel something under the shrink wrap in the center of the

Gene wrote: Gene, I've been using the MP-1 as my main Pedestrian and Vehicle Mobile antenna with the FT-817. It is the best and most versatile portable whip I've used so far (including at least 3

Forwarded from QRP-L ---------------------------------------------------------------- ~~~~~~~~~

I have the PW-1 which comes with the 12" lower mast. What I have tried is the Hustler 54" mast on the bottom as a replacement... Yes, it works better. Better enough to offset the cost of the Hustler

Sorry, Murphy got into the act. Correct URL is: Reference: www.mahaenergy.com/download/pdf/nimh_battery_twoway.pdf battery overcharging/overheating. as

Michael -- Thanks for the report! Hope to be able to work you one of these evenings. Probably won't be on tonight, but I hope to continue with my evening "Field Day" sessions as time and chores

Bill, You were +/- 57 in Chicago last night talking to the 1KW club station in Maine. After you finished with him, I talked to him with ten watts on a TS-50 and mobile-whip dipole. Michael,

See message #8976. 73 de KR8L/7 There 4 cells. rating.