开云体育

Hi Al, Thanks for the feedback, and I get that, but the issue seems too consistent. I can transmit into an antenna or dummy load, 1/2 watt or 5 watt, and it still happens. I can tune the 2M side up

You are in the near field and possibly picking up radiation from within the radio. What does the harmonic look like in the far field? 73 Glenn WB4UIV --

N1QDQ, when you are seeing interference that is not a harmonic and is not attenuated by a low pass filter at the transmitter, then the interference is outside of the radio and is likely a mixing

I might have transcribed those number incorrectly. I took some notes and had to leave the project for a few hours. I just got back home and put it on the bench, into a good dummy load, and used my

The third harmonic of 145.952 mhz would be at 145.952 x 3 = 437.856 mhz, not 446.264 mhz as you indicate. Typo error, I assume?? Also-does the undesired ("third harmonic") signal show up when you

I'm using a 817ND as the uplink rig in my satellite station and am getting a large spur at 446.264 when I transmit on 145.952 (for example). I'm still working on measurement/testing but I wanted to

The cells are a tight fit in a standard AA holder. The springs aren't strong enough to push the cells to make a good contact at the other end so I pushed them up by hand and secured them with heat

The charger plug for my WindCamp gold battery for my 817 was damaged by water during Hurricane Ian. ?Does anyone know how or where I can buy a replacement? I don’t need a new battery, just the

That's a rare find. This is the first I've seen a HL-50B posted in 2 years (45B is more common) and it comes with the remote. (I already have one I got years ago - I have a search looking for the

I get all my things for my 817 at Powerwerx.com -- 73's Dave NU4N

What size Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

Ditto! I now need to find a use for the other 99 P-clips. Martin - G4EFE

After an online search I found a solution that cost me nothing. -- Mike G8GYW

W4RT is RT Systems now and there is more need for software than FT-817 accessories. I bought various items in the past that helped me make a lot of contacts with their products John VE3IPS -- Sent

Perhaps you mean: Anderson Powerpole, DC Power, Wire & Cable, Two-Way Radios powerwerx.com Ken, N2VIP

The correct website is Powerworx.com

Ah yes, thanks. -- Mike G8GYW

Dave, Not sure what your question is. But if you go through the config menu you can set your 817's baud rate.? Default is 4800 baud I think.? The rig control program needs to be told its talking to

Anything strong enough is likely to require case modification. Joe Sent from the all new AOL app for Android On Sat, Nov 5, 2022 at 12:20 PM, Mike<mail@...> wrote: Is there a dc

Dave probably? meant powerwerx.com Don? K5ZRQ?