Hi,
While I don't have the RT Systems software, I can at least tell you
what is probably happening - and maybe you can tell them and they can
fix it.
It *is* actually possible to adjust the Attenuator, IPO, AGC, power,
radio version, etc. setting via the serial port, but in short, what is
happening is that bit 4 of the 3rd byte of the memory associated with
what you are writing (i.e. memory number, or the memory associated
with the current band/VFO) is being inadvertently set and the
Attenuator is being activated(i.e. the 3rd byte also selects the
CTSSS/DCS tone mode, and IPO.)
(Programming the radio via the serial port is discussed in some depth
at:
Please read and understand the warnings before you do anything.)
73,
Clint
KA7OEI
--- In FT817@y..., thomas4174@y... wrote:
As far as I can tell, the software has no documented control over
the attenuator setting, but something is causing it to change within
the radio. Has anyone else experienced this, and if so, have you found
a way to prevent it?
Thanks...
