Re: RF Gain and the S-meter
|
Hi Tobias, ? Re-read the second word of the second sentence. It says to REDUCE the gain, not increase it as the control is rotated CCW. ? So, what is being said is exactly correct. ? The way that the RF gain control works is to increase the AGC voltage, which reduces the gain of the controlled stage(s). As the S meter is simply a voltmeter on the AGC line, it shows a higher reading as the gain is reduced ? 73….Eric VK2VE. ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Tobias KK7BCO/2M0TFF
Sent: Sunday, June 2, 2024 12:34 AM
To: [email protected]
Subject: [ft817] RF Gain and the S-meter? Hi all,
I am making myself some field-notes for the FT-817, referencing the existing cheat sheets and the manual. On page 20 of the operating manual:
"If your transceiver is configured for "RF Gain" use, rotating this control fully clockwise in
the SSB/CW/Digital modes will provide best sensitivity. To reduce the receiver's RF Gain
somewhat, rotate this control counter-clockwise slightly. You will observe an increasing
number of bars on the S-meter as you rotate the SQL/RF control counter-clockwise; this
indicates increasing AGC voltage, which is causing the front-end gain to be reduced."
I am presently confused, as I would expect the S-meter to be more active with the RF gain increased, but the way this is written (and in my experience), the S-meter decreases when the RF gain is increased. This also reduces the relevance of an RST based on reading the S-meter.
Am I misreading things?
73
|
