Greetings, I want to add some F coupling rails to my 20 inch Davis and Wells bandsaw so I can use my felder table extensions on it. ?I thought I would check with the group To see if anyone had some for sale. Also, if anyone has the dimension drawings or installation instructions, that would be great if I could check the fit before I went through a purchase. Much appreciated.

?

Best regards, Timothy

I don’t have one for sale. This is Felder option for 20” Dual 51. My Felder tables have the height adjustment but the Jointer came predrilled, I can use the table from planer to the jointer w/o making adjustment. The bar sits 36.5 mm below the jointer table surface.

In your case, you would want to install the bar at the same height as the other machine that you use the table with.

Imran Malik

Hi Tim,

?

We used 1/4” stainless steel bar stock on our MM20 bandsaw table. ?Drilled 2 holes,

added some?spacers and the Felder aluminum extension table w/leg mounted right on…

?

Nothing fancy, used scrap material, and it works great.

?

Mike

M.E. Blake General Contractors

Timothy, I have a couple extra Felder table extensions (1000mmx150mm - part No. 400-104) that come with the 300mm F-coupling.??

?

If interested you can message me directly.

?

Troy

503-869-5668