开云体育

Thanks for all the comments everyone! Sounds like that Robland should stay someone else’s problem. I did a quick scan of the Robland forums. It looks they are indeed constantly going out of

Hi John, Thanks for the info. I am not educated in the science of milling so are the slow feed rate results better because of better chip evacuation or less cuts/mins or both? Imran ? Yes both 3/8"

Yes both 3/8" x 3/8" and same higher quality melamine board not found at Home Desperation.?JohnJMK Services

are the Freud depth of cuts the same as the Felder depths? just asking

Here's my Freud dado at normal feed rate that I use for most cuts in all materials, about 20'/min. It's 12 to 15 years old model SD508. It's been bored and pinhole.?JohnJMK Services

The 20 and 30 second cuts looks acceptable, but the amount of time for the cut is really bad.. and wow..that 10 second cut really is horrible!? I would love to see a comparison of several dado

We have had recent discussion about the quality of cut in Melamine. I had to do some 3/8" wide dado cuts so borrowed a friends Felder dado set to check it out. This is the first time I've used this

He was suppose to reply to me, but never did..haha

Hi Frances, Do you still have the dado for sale? If you do you can contact me at lajiness@... Thanks, Al

A cabinetshop I used to work in, had a Robland.? It was an absolute HORRIBLE Saw.. I hated it and vowed to never buy a Robland anything.? I felt the design was extremely poor and it never kept it's

1K to much scrap iron when it was new martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell 608-824-0023 fax airtightclamps@... airtightclamps.com

Benjamin, Not sure what you are after but this appears to be a major project. I have no clue his easy it would be to find missing parts. There is no commonality between Felder and Robland parts. I

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the [email protected] group. * /For Sale/Model CF741 Professional

Hi, Probably a dumb question, but... There’s a robland x31 on ebay that is missing its table saw table and and an outfeed table for the planer. Looks like a laguna era machine:

i will, thank you!

Michael, look for a private msg from me with some machine quotes that I received in 2019. Imran ? [Edited Message Follows] I have an account and it is only showing list prices for the k700 and

I have an account and it is only showing list prices for the k700 and under. No 940/format/Kappa pricing. It says "Request free quote" - instead.

You can get the list price if you make an account with username and password. Pretty simple. Bill Belanger wrote:

Bill, Thanks for the reply. I am curious what the costs of all these machines are. Would be great if Felder had them listed. At least the "List price"

For the saws without the display looks like the switch to select scoring on/off is on the front panel, you can see it on the k740. Imho that config would be a bit of a pain, I would end up just