开云体育

In my experience no one is interested in grinding knives for the Universal head as there is no money in it for them unless they are carbide. That substantially raises the cost. To see the full range

I find it very frustrating to deal with Felder for a variety of things, primarily because their eshop website is so flaky. Half the time their stuff is not on the website, and even when it is, it is

I thought you could get custom knives for both 40mm & 50mm safety cutters. They had a graph paper for you to draw one out. Remember it being the cheapest option to get profiles, for hobbyist or short

Thanks for the quick replies. The one shown by John is like mine on a 2006 model. Gil Nashville

Members always seem to forget that a year is very important since most of the saw configurations cover over 20 years. I believe the pics I showed are from about 2007 to 2013.JohnJMK Services

Sounds like that is what mine has, the low head 8mm SHCS. It’s to clear the dust collection sheet metal chute that surrounds the blade. Pretty sure I have a box of them out in the shop too. Brian

I could easily get that taken care of if there is a one time buy type of thing…. my son is always looking for work for his CNC mill. Brian Lamb blamb11@... www.lambtoolworks.com

On my k-37 it is m8x20mm. It is also a low head- 5mm high.I'm not sure why the thin head, perhaps for clearance when the blades are tilted- it's the same cap screw for the main blade.I bought a box of

I have a funny feeling the Mad scientists ( Yes.. YOU..David Best and Brian Lamb and maybe even Mac) are already concocting something deep down in their machining lab as we speak)

the purpose of all this effort, is so that once we have the boom arm made, kinks worked out, and detailed drawings all made up and all the parts linked where you buy them, is like Joel said, so anyone

They might be different from year to year and type of scoring. My 2001 belt driven scoring is a standard socket head cap screw of about 20mm- 25mm in length, not a countersunk head like you are

Try this cutter, might be more of what you are after:

The threaded section is approx. 1/2". See pics?JohnJMK Services

For round over shaper cutters go to the Felder site and type PN 500-04-087 for Standard and PN 04.0.149 for Professional. The universal cutter setup can be confusing but when setup properly can be

I am awaiting delivery of a CF531. This will be my first shaper. I'm familiar with router bits of course and the fantastic custom stuff you can do with shaper tooling like rail and stile cutters, but

Another way to think is that fan is spinning in still air and thus doing no work. Imran

The work (in a physics sense) that a fan does is move air.? The more air moved, the more work done, the more power required.? A low-restriction system moves a lot a air, and thus does a lot of work

Throttling a pump by increasing head pressure will actually lower the amps in use as the pump is doing less work. A dust collector will pull more amps with a clean filter and fully open duct system

I have a 700S sliding saw and went to install the scoring blade and was missing the bolt for fastening the blade to the arbor. I’ve determined that it’s an 8mmxx1.25 thread. I want to try and find