开云体育

Just watch the videos. The Betterley Una-Guage is impressive too. And free shipping. Regards, Chris Perren 512-415-6951 Sent: Tuesday, July 28, 2020 9:13 AM To: [email protected] Subject:

Am I the only one with the Betterley Una-Guage. Works like a champ and can be used for many different functions. Dave Davies

Hebor H-50 appears to be an interesting tool although not cheap. I’m assuming its German. Regards, Chris Perren 512-415-6951 Sent: Tuesday, July 28, 2020 7:58 AM To: [email protected]

Joel, I been using one sense 89, really the old man on the block. Go to for analog set up. Mac,,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell

Glenn, I ran a timber business in Northern Ireland for twenty four years. For approximately a five year period during that time, we stored all of our machined hardwoods and softwoods in twenty foot

Glen, ??? My environment is admittedly pretty dry (I live near Spokane, WA), but I've been storing both tools and lumber in a container for several years without any issues. -- Michael Garrison

hi.. while I cannot answer for David, I did purchase his survival guide as a PDF file not too long ago.? Best purchase I ever made

Hi David Best Is the pdf copy of your Survivors Guide still available? Peter Low ________________________________ Sent: Tuesday, July 28, 2020 9:34:50 PM To: [email protected]

It should be available as PDF, but not for free AFAIK. David Best is on the list as well. He should be able to provide you with the details being the author. Regards, Jonathan

It’s roughly $500. https://www.scosarg.com/hebor-h50-spindle-moulder-setting-device <https://www.scosarg.com/hebor-h50-spindle-moulder-setting-device>

didnt the author make this a free pdf a few years ago?

Hi Rob I’ve been looking out for a copy this book for ages. I’m in Australia but am sure we can work out payment and transport if that’s OK with you. I have a CF731S Pro and the knowledge

I’ve been looking out for a copy this book for ages. I’m in Australia but am sure we can work out payment and transport if that’s OK with you. I have a CF731S Pro and the knowledge contained in

The key to elimination of the condensation is ventilation. Install vents and a powered fan. We have done this in northern CA with good results. Alex

My remarks were intended for anyone who might be influenced by your your suggestion that it’s as simple as removing the retaining collars to replace the bearings - it isn’t that easy. David Best

That's 730 kWh/month reduction, which is $90 at $.0125/kWh, which seems to be about the residential rate where you live. You new lights produce about 25% fewer lumens compared to average fluorescents,

I bought a 40 foot high cube 2.5 years ago and was very worried about condensation too, but it has not been a problem at all. We go from just below freezing up to 45 celsius here in south east

I was wondering if anyone stores material in shipping containers. I was recently approved to be a distributor for moulding and hardwoods. I am moving forward with the building addition to accommodate

Dave gets the tenon cutters! Joe in New Orleans

I just checked my old F7 spindles and all have zerks too. Good info on the nut. They are common enough that you don't need to buy from Felder. I'm remembering $5 or less but don't remember how long