开云体育

David B and others have had to make the spacer to work in conjunction with using the Smart Stand if memory serves me right. Works fine with the standard PF mounting post. Also might need the longer

Skip, Very interesting. Can you post some pictures? Thanks Dave [email protected]> wrote:

My AD 941 came with a PF mounting bracket installed in pre-drilled holes (I ordered it that way). I think, as David Best has pointed out, for it to work practically, you need to make a spacer block to

You should check with Felder, they will surely know more than us... Regards, Mark https://www.instagram.com/kessler_woodworks/?hl=en

It will work on the AD951. But as far as I know not the AD941 Dave wrote:

Dave you should check with John as to how he knows it will work. Andy Sent: Tuesday, July 28, 2020 3:12 PM To: [email protected] Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC Could be,

If you look at the topic, a lot of messages are not there, if you look at messages, they are all there. Not sure why, but no messages have been removed. Brian Lamb blamb11@...

Dave, not sure. I would call service to see if it’s possible. Someone told me that I could do it before I bought it and I think even after when I was going to upgrade to the 951 after the 941

I’ve heard of some folks buying stuff related to metal working and it’s all been re-badged Chinese units, quality is suspect to say the least. I haven’t heard that they don’t support you, but

Mark, I couldn't find the mount on their e-shop. Do you have a part number? Thanks, Dave Davies

Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine. Regards, Mark https://www.instagram.com/kessler_woodworks/?hl=en

Mark, I'm pretty sure you can't mount it on the AD941. I have one and there are access panels in that location. Dave Davies

My point is you don't have to drill the holes no panels to alter/replace as its designed for the machine.

I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width Regards, Mark

Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?JohnJMK Services

Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously... AD41 silent cutter Single phase 4hp i think (Whatever is the

I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941. There are a lot of options on the 951 so I would simply just ask the rep to

Paul, I have found that if you get close to maxing out options on one level of machine that jumping to the next level standard build or at least same options +1 isn’t that big of a jump dollar

David, That is why I was curious.? The AD941 with the options I want is about the same price as the Baileigh.? My 951 question is based on current discounts and the fact that I wont need any options

I see 6 messages on this post. Bill Belanger [email protected]> wrote: