开云体育

I use Butchers Bowling Alley Wax that was available @ Home Depot. Its super slick and no Silicone.

What is the name of the wax guaranteed not to have silicone? Marlowe [email protected]> wrote:

a tad off topic but I feel a need to mention it. I used to use Johnson’s paste wax to lubricate my machine tables, and had persistent problems w/ fish eye downstream when finishing pieces. I

Jason, many reasons. - I wanted to use my shiny new shaper =) - The joints are nice looking - I wanted to miter the joints and needed some more glue area, tenons solves this - The stool I'm trying to

Very nice work here, I find these types of posts inspiring. Brian could we see a couple more photos of the table as a whole, it looks beautiful from the under side. Mark Foster

Nice looking joints fellas, I haven’t done a mitered one recently but I did just do a plain ol’ one with just saw kerf and chisel It went pretty quick. Have to incorporate a miter one at some

I did a similar joint years ago, one of my first projects with the Felder. A dining table and I did a double bridle/mitered joint… was fun and looked great. Brian Lamb blamb11@...

Because it is so gorgeous Jason! Michael just needs to add some little square Ebony pins…. :-) Lucky

Michael, Just curious why you chose a mitered bridal joint? What's the application? Jason Holtz J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406 612.432.2765

Gil - I had a two year old f700 with a 4wheel feeder I sold two years ago for $7,000 - all the equipment listed about but no cutters, I also had a 30mm spindle along with the 1.25” spindle- this

Seriously beautiful joint! Jealous- still awaiting calibration and commissioning of my shaper. Covid boarder closures have meant that Lucky can't visit from Queensland and the technician can't come

Thank you David. It means alot to get such nice words. And, I agree. I have a Domino. It’s convinient, but the joints doesn’t speak anything.

Runs smoothly... [email protected]> wrote:

Beautiful! For outright sex appeal, your joint pisses all over the usual mitre plus domino or mitre plus dowel iteration. Warm regards, Lucky

Some images of the completed joint. It took some cuts before I had it dialed in. The next time I’ll probably dial it in quite fast when I know the ins and outs. some take aways: - clamp pieces to

I have an older A3-31, and if I do not keep the planer bed waxed, I get “grabbing” and snipe in the infeed. ?I don’t know if this will help on the out feed. ?I use Johnson furniture wax to

If it run smoothly, you're golden. Marlowe

What do I look for, just vibration? Sent: Wednesday, October 7, 2020 11:49 AM To: [email protected] Subject: Re: [FOG] Won the bandsaw ! Correct Marlowe. Downside is they are very expensive

Correct Marlowe. Downside is they are very expensive to repair if a problem. Wheel condition is actually more important than motor. I don't have a saw with Carter wheels but have heard stories of

JMK were you talking to me? Bill Belanger