Re: RL-125: What does this do?
That is my understanding too:
When the pressure difference between the inside and outside is above (or lower, not sure) your setting, the light goes on. I am not sure if this is really working on my RL140 as the light never came up. Now, as a hobbyist the daily manual cleaning when I used it might be overkill.
However, on your picture you have only one pipe for air pressure, it looks like you are missing one. I have two on my RL140.
Bill
|
Re: Pending delivery, looking for advice
I purchased a copy of the Felder Survival Guide from David in July.? ?He no longer prints it, so it is pdf only, $50.? Part of the agreement is not to share it. (I'm okay with that, it's his copyright.)? ?Both David and the book are clear that the manual has not been kept up to date, so many details will apply only to older saws.? Nevertheless, I have found it to be well worth the cost.??
--
Terry Therneau
|
Re: AD-41 J/P, Sotps dead in the middle of a planner operation
|
Felder KF700 and Hammer A3-31 For Sale
#forsale
Good Morning, About 8 months ago I posted that I would like to sell my KF700 that I purchased in 2009, but honestly I was not fully vested in selling it at the time.? I had a few people interested, but since I wasn't a motivated seller, I likely wasn't reasonable on the price.? Things have changed.? Some background ... I am a hobbyist and bought my woodworking equipment to prepare for my retirement.? I retired 4 years ago, and started living the dream.? Unfortunately, two years ago I was diagnosed with a degenerative muscle disease and was cautioned about the dangers of using some of my equipment.? That was the reason I listed the saw for sale last year.? But honestly, I didn't believe the medical advise and wanted to keep doing what I love.? I have had two serious incidents involving trips to the hospital over?the past six months and it is apparent I should not continue to tempt fate.? ?Therefore, I am now what some would call, a motivated seller. The equipment I have to sell is:
- a KF700 Professional 3-Phase Saw / Shaper in excellent condition with lots of accessories.? It has a 2050mm slider and an F38 power feeder.? Total cost of the entire setup exceeded $20,000 when purchased in 2009 & 2010
- a Hammer A3-31 Jointer / Planer with 3 blade cutter head.? It has the mortising assembly bed with coupling unit & tooling. Total cost when I purchased in 2008 was over $5,000
- Kay Industries Phasemaster Rotary phase converter - Purchased in 2009
- Powermatic 5HP 3 Phase 20" helical head planner.? Model # 209HH.? Purchased in 2012
- Powermatic Drill Press with variable speed digital readout, Model # PM2800B? (single phase).? Bought in 2015
- Powermatic Tilting Table hollow chisel mortiser with cabinet.? Model 719T? Bought in 2014
- Jet 18" Band saw;? Model #JWBS-18X?
- Jet 42" Lathe; Model # JWL - 1642 EVS.? Bought in 2012 with custom tool storage and 200lb weighted stand
- Apollo HVLP Spray.? Model 1025 with 7500T Spray gun, (only used once).? Bought in 2016
All of the equipment is in excellent shape; indeed my dear wife jokes I take more pride in my equipment than what I make with it !
If you are interested in any of the tools, please send me a private message and I will send whatever information you desire and will even face time video so you can see exactly the condition of the equipment.? I live in south central Idaho, 3 hours north of Salt Lake City so delivery is not "round the corner".? ?But rest assured I can assist with packing & preparation and help with delivery.? Most of the larger tools (including the KF700) have mobile bases and so can be moved around easily.
Please be confident I am a serious seller and will be reasonable in the pricing of the equipment.? My preference is to sell the tools in "bundles" since I feel that brings the greatest value & utility to the buyer (ie: all the KF700 stuff together).? But, if that is not possible, I will list all the components at a later time for individual sale.? Therefore - please do not ask about individual accessories at this time - I would hate to tell someone the KF700 comes with 8 blades only to sell it later with only 4.
Thanks,?Rob
|
Imran,
Thanks for your help, I’ll try it and?let you know how it goes.
Thanks, Mitch
On Sun, Jan 10, 2021 at 9:18 AM imranindiana via <imranindiana= [email protected]> wrote: Mitch,
You can connect power to A1 & A2. do not connect any thing to dust collector. Confirm 15 & 16 are shorted and there is an open between 15 & 18.
Now turn a machine on that has the coil installed. You should be able to verify that 15 & 18 are now shorted and there is an open between 15 & 16.
This is what the dust collector switch needs to turn the DC on.
Imran ? Mitch, ? This is best I can think of. Maybe someone here will confirm. Run it by Felder before implementing it. <image001.png> Imran ? ? From: [email protected] On Behalf Of cmluck01
Sent: Saturday, January 09, 2021 8:12 PM
To: [email protected]
Subject: Re: [FOG] ZIEHL STW1K S225636 Dust Collector Control Module #dustcollection ? The dust collector motor is single phase and thus uses just two of the available 3 input lines at the contactor. The contactor is controlled by 240V for switching on/off. ? On Sat, Jan 9, 2021 at 7:21 PM imranindiana via <imranindiana=[email protected]> wrote: I assume your dust collector motor is 3 phase since you mention it is controlled by a 3 phase contactor. How is this contactor switched? 110AC or 220AC or some DC voltage? I can at least recommend something that you should run by felder before trying. From PN you have 220-240VAC model. ?Greetings to all,
I recently purchased, from Felder, a ZIEHL STW1K S225636 Dust Collector Control Module along with a few of the ZIEHL STWA1 Coil Transformers to control my dust collector. This module controls up to 8 machines and uses the coil transformers to activate a relay in the STW1K to turn on the dust collector. When the individual machines (say a saw or planer), are powered off, then the dust collector will too be turned off, following a short delay. If anyone is familiar with this setup, I could use some help on the wiring. I am unsure of the connections at A1, A2, 16, and 18. See photos and wiring diagrams. For reference, I'm running a Felder K940 5.5 KW 3 phase slider and Felder AD951 3 phase Jointer/Planer 7.5 KW via a Phase Perfect 20 HP. My Dust collector has a 5HP with Baldor motor with a 3 Phase contactor for on/off. Any input is appreciated. Thanks
|
Re: RL-125: What does this do?
I believe that is a sensor that works to tell you when the filter needs to be cleaned. When the pressure sets it off, the light above the power switch will turn on to tell you the filter needs to be cleaned/changed.?
I've had this RL-125 for 15 or 16 years and I want to know what does this adjust?
I have not changed the setting, but if I did, what will change?
Thanks in advance,
Phil
|
RL-125: What does this do?
I've had this RL-125 for 15 or 16 years and I want to know what does this adjust? I have not changed the setting, but if I did, what will change?  Thanks in advance, Phil
|
Re: Pending delivery, looking for advice
I second Joe’s recommendation. Damage may look benign but assume the worse and protect yourself. ? Imran ?
toggle quoted message
Show quoted text
From: [email protected] On Behalf Of Joe Jensen Sent: Sunday, January 10, 2021 11:32 AM To: [email protected]Subject: Re: [FOG] Pending delivery, looking for advice ? CAREFULLY inspect the crate for any damage.? If any damage write on the delivery document describing the damage and add “hidden damage likely”.? I believe the delivery driver is supposed to wait for you to open the crate to inspect.? I always write on the doc “possible hidden damage” ? From: [email protected] <[email protected]> On Behalf Of Troy Holtby
Sent: Saturday, January 9, 2021 3:55 PM
To: [email protected]
Subject: [FOG] Pending delivery, looking for advice ? New to the group. I have a delivery of 4 new machines due in 4 weeks (KF700, FB510, RL160, and Hammer A3-41.?
I am just a hobbist and am new to both sliders and Felder but after much research chose to go this route.?
With the machines due in the next month, is there any prep advice anyone could give to make sure I'm ready when they arrive? (Electrical is done and verified)
|
Re: Pending delivery, looking for advice
CAREFULLY inspect the crate for any damage.? If any damage write on the delivery document describing the damage and add “hidden damage likely”.? I believe
the delivery driver is supposed to wait for you to open the crate to inspect.? I always write on the doc “possible hidden damage”
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]>
On Behalf Of Troy Holtby
Sent: Saturday, January 9, 2021 3:55 PM
To: [email protected]
Subject: [FOG] Pending delivery, looking for advice
?
New to the group. I have a delivery of 4 new machines due in 4 weeks (KF700, FB510, RL160, and Hammer A3-41.?
I am just a hobbist and am new to both sliders and Felder but after much research chose to go this route.?
With the machines due in the next month, is there any prep advice anyone could give to make sure I'm ready when they arrive? (Electrical is done and verified)
|
Re: Pending delivery, looking for advice
On 10/01/2021 16:06, Brian Turner wrote: Does anyone have a copy of The Unofficial Survival Guide by David Best. I am happy to pay for it, but its no longer in print and there is no where to buy it from. Contact the author David P. Best. He is a regular on this group, you should easily find his details. Regards, Jonathan
|
Re: The Unofficial Survival Guide
Bill,
Did the buyer pay?
I am just curious, if it is not right of me to ask this don’t answer.
Imran
toggle quoted message
Show quoted text
On Dec 31, 2020, at 8:31 PM, S L via groups.io <ayesurely@...> wrote: ? Bill, If that ebay auction doesnt work out I'll give you $50 if you throw in the shipping to the EU....oh hang on...sorry ...I just checked...I'm not in the EU(anymore)....forget I mentioned it ...lol ?
Regards? Stephen? If that were a corporate purchase as has been surmised, ?zero history wouldn’t be unusual.?
Could also be a shill who got caught out too. ?
D Sent from my iEye ?The winning bidder has zero buy/sell history on eBay.? I’ve got $20 that says payment won’t settle on this.? Any takers? ? $1,925 is insane - I mean it’s not even signed by the author. ? LOL
Begin forwarded message:
Subject: Re: [FOG] The Unofficial Survival Guide
Date: December 31, 2020 at 4:31:46 PM PST
The $100 listing has been removed.? Looking at the bidding history, You can see only two bidders left when the price went over $125. The bidding history looked weird to me.
Bill can tell us if the buyer pays in 4 days.
James Maybe it’s time to have a Futures ETF that tracks the Survival Guide resale value. ?
Mark,
You can get the hard copy at just $100 now, a new listing, no bid yet.
<Capture.JPG>
James Do you think the high bidder would suddenly realize David would sell a digital copy for I think he mentioned at one point $50? (Now $500 ?)... ? The price jumped to $1,925 two minutes before the end. I seriously doubt that the buyer would pay unless he/she has a special purpose before the end of 2020.
<Capture.JPG>
James Non payment has repercussions, though only to established members.?
You could always 2nd chance offer it to the next highest bidder.?
D ? Well, it could happen that the buyer does not pay at the end.
James On Thu, Dec 31, 2020 at 4:48 PM Chris Perren < cperren@...> wrote: And it has FREE shipping. ? ? And there is another listing at $100 now, no bid yet. Weird.
James One hour left, the bid is $1,625!
James
Now there is an asset that is increasing in value with time !!!
Get
well it is not the million dollars I was predicting but looks like you are going to do well with this sale ?
Imran
On Dec 31, 2020, at 8:35 AM, Bill Belanger < Bill@...> wrote:
?
David has a bridge to sell too Imran...
Bill Bélanger
On Thu, Dec 31, 2020 at 6:32 AM imranindiana via
<imranindiana= [email protected]> wrote:
How come I see $480 on Ebay vs the $2K posted here?
Imran
?
OK, Bill, this is getting serious now.
<screenshot_4590.jpg>
On Dec 22, 2020, at 3:23 PM, Bill Bélanger < Bllblngr@...> wrote:
I have placed my copy of "The Unofficial Survival Guide" for sale on ebay if anyone is interested.
Bill Bélanger
|
Re: Pending delivery, looking for advice
Watch e bay they are selling pretty cheep one went last week for $2,000.00! Designing and building for 50 years
toggle quoted message
Show quoted text
On Jan 10, 2021, at 9:06 AM, Brian Turner <bjamesturner@...> wrote:
? Does anyone have a copy of The Unofficial Survival Guide by David Best. I am happy to pay for it, but its no longer in print and there is no where to buy it from.? With a narrow pallet jack I found no issues with getting my ad941, k700s and the k940s off the pallets by myself. I was actually surprised at how easy it was, I thought for sure I was going to run into trouble. On Jan 10, 2021, at 8:15 AM, Bill Hope <hope.we@...> wrote:
?I used an engine hoist to get my B3 off the pallet (video: ). Tip the driver if he's willing to put them in your garage/shop. Tenryu blades are nice.
--
-- Measure it with a micrometer, mark it with chalk, cut it with a Hammer
|
Re: Pending delivery, looking for advice
Does anyone have a copy of The Unofficial Survival Guide by David Best. I am happy to pay for it, but its no longer in print and there is no where to buy it from.?
With a narrow pallet jack I found no issues with getting my ad941, k700s and the k940s off the pallets by myself. I was actually surprised at how easy it was, I thought for sure I was going to run into trouble. On Jan 10, 2021, at 8:15 AM, Bill Hope <hope.we@...> wrote:
?I used an engine hoist to get my B3 off the pallet (video: ). Tip the driver if he's willing to put them in your garage/shop. Tenryu blades are nice.
--
-- Measure it with a micrometer, mark it with chalk, cut it with a Hammer
|
Re: Pending delivery, looking for advice
With a narrow pallet jack I found no issues with getting my ad941, k700s and the k940s off the pallets by myself. I was actually surprised at how easy it was, I thought for sure I was going to run into trouble.
toggle quoted message
Show quoted text
On Jan 10, 2021, at 8:15 AM, Bill Hope <hope.we@...> wrote:
?I used an engine hoist to get my B3 off the pallet (video: ). Tip the driver if he's willing to put them in your garage/shop. Tenryu blades are nice.
--
-- Measure it with a micrometer, mark it with chalk, cut it with a Hammer
|
Mitch,
You can connect power to A1 & A2. do not connect any thing to dust collector. Confirm 15 & 16 are shorted and there is an open between 15 & 18.
Now turn a machine on that has the coil installed. You should be able to verify that 15 & 18 are now shorted and there is an open between 15 & 16.
This is what the dust collector switch needs to turn the DC on.
Imran
toggle quoted message
Show quoted text
On Jan 9, 2021, at 9:39 PM, imranindiana via groups.io <imranindiana@...> wrote: ? Mitch, ? This is best I can think of. Maybe someone here will confirm. Run it by Felder before implementing it. <image001.png> Imran ? ? From: [email protected] On Behalf Of cmluck01
Sent: Saturday, January 09, 2021 8:12 PM
To: [email protected]
Subject: Re: [FOG] ZIEHL STW1K S225636 Dust Collector Control Module #dustcollection ? The dust collector motor is single phase and thus uses just two of the available 3 input lines at the contactor. The contactor is controlled by 240V for switching on/off. ? On Sat, Jan 9, 2021 at 7:21 PM imranindiana via <imranindiana=[email protected]> wrote: I assume your dust collector motor is 3 phase since you mention it is controlled by a 3 phase contactor. How is this contactor switched? 110AC or 220AC or some DC voltage? I can at least recommend something that you should run by felder before trying. From PN you have 220-240VAC model. ?Greetings to all,
I recently purchased, from Felder, a ZIEHL STW1K S225636 Dust Collector Control Module along with a few of the ZIEHL STWA1 Coil Transformers to control my dust collector. This module controls up to 8 machines and uses the coil transformers to activate a relay in the STW1K to turn on the dust collector. When the individual machines (say a saw or planer), are powered off, then the dust collector will too be turned off, following a short delay. If anyone is familiar with this setup, I could use some help on the wiring. I am unsure of the connections at A1, A2, 16, and 18. See photos and wiring diagrams. For reference, I'm running a Felder K940 5.5 KW 3 phase slider and Felder AD951 3 phase Jointer/Planer 7.5 KW via a Phase Perfect 20 HP. My Dust collector has a 5HP with Baldor motor with a 3 Phase contactor for on/off. Any input is appreciated. Thanks
|
Re: Pending delivery, looking for advice
I used an engine hoist to get my B3 off the pallet (video: ). Tip the driver if he's willing to put them in your garage/shop. Tenryu blades are nice.
--
-- Measure it with a micrometer, mark it with chalk, cut it with a Hammer
|
Re: AD-41 J/P, Sotps dead in the middle of a planner operation
Dino,
Are the blades sharp?
What happens if you increase the feed rate. Light cuts at very slow feed can dull the blades.
If you did not mention labored sound, I would have thought a limit switch or emergency stop circuit going bad.
Does the labored sound, sound like electric brake? That is another possibility.
Imran
toggle quoted message
Show quoted text
On Jan 9, 2021, at 1:25 PM, dino drosas <dinod@...> wrote: ?It does not do it all the time but enough to really aggrivate. I am taking a typical light cut (.02" to .025"), planner table is clean ?and waxed, the feed is set to ?slow
and it will begin to sound labored and stop dead. Lower the table and start over with the same setting and all is well. My machine is a variable speed version.
|
Re: Pending delivery, looking for advice
Many of us here have standardized on Tenryu 300mm blades like this: ?
This might also be helpful to you dealing with blade nomenclature: ???
David Best
https://www.instagram.com/davidpbest/
toggle quoted message
Show quoted text
On Jan 9, 2021, at 6:25 PM, Troy Holtby < tholtby@...> wrote:
Thank you all for the responses. They are very helpful. I ordered clamps from Mac about 3 weeks ago so they are due to show get here a few weeks after the machines.?
Looks like I need to get my hands on a narrow pallet jack.
Do you guys mostly run 10" or 12" blades in a KF700?
|
Re: Pending delivery, looking for advice
Thank you all for the responses. They are very helpful. I ordered clamps from Mac about 3 weeks ago so they are due to show get here a few weeks after the machines.?
Looks like I need to get my hands on a narrow pallet jack.
Do you guys mostly run 10" or 12" blades in a KF700?
|
Re: Hammer C-31 Planer Issue - Motor Triping
No, it doesn’t, Annu. ?It injects DC into the motor winding.
toggle quoted message
Show quoted text
Hey All,
the caps will be in on Tuesday so I find out then. ?
Cliff,
It had a electronic brake that is supposed to stop everything from spinning within 10-12 seconds of hitting the stop button. ?I think all it does is switch polarity on the motors.
-Annu?
|
imran
Joe Jensen
Jonathan Martens
Brian Turner
Bill Hope
David P. Best