开云体育

HAHAHAHAHA

Stuff sells faster than heroin ? Sent from a device with less than stellar autocorrect

The equipment is 3 Phase. The Shaper/Feeder, Band Saw, and Edge Belt Sander are sold. Ed Kane

hello dick, i have an f 38 feeder. ?would like another for back up. if you will accept $400 i will take it. all best, hank

Please add me to your list as well. Elwin Kershaw

Yes, Imran, you are exactly right and I double-verified by measuring my Felder Pro-Lock (labeled “Quick-Lock”) cap shoulder diameter — it’s 29.99 mm. I feel that if I make sure the top bushing

Gents – I was looking at the organization gismos that Rev-a-shelf has and wanted to use some in some custom size built-ins. Has anyone ever tried to buy just the components and then add them

I assumed folks would order the size they needed, they must make a variance of sizes. Brian Lamb blamb11@... www.lambtoolworks.com

Brian, That is likely kosher but only with 30mm lock on 1.25” spindle. Folks here are planning to get 1.25” ProLock. I will be interested in a 30mm ProLock but not one for 1.25”. I don’t

Use a thin wall top hat bushing and you would be fine. Brian Lamb blamb11@... www.lambtoolworks.com

Hi Alex, I am no authority on this and do agree that downward pressure is what the cutter requires. The 2 pins and bolt should center the cap so likely would avoid any balance issues. But since they

Hi Imran, The pressure developed by he pro-lock cap is down. As long as the cap (for the 30mm spindle) will capture the top edge of the spacer stack that extends above the 1.25”spindle, it will

Year of manufacture, power requirements, and some photos would be helpful here.

I measured the raised part on the standard cap of 30mm and 1.25” spindles and they are sized for each uniquely. See pics. It makes sense that Dave Rossetti was able to install his Felder 30mm

Didn't Joe have the Profil shaper? If it fits that and the F700 it more than likely will fit mine. I'm still in Dave wrote:

I do not know – the size is a bit different and they were not sending the one for the 30mm. The 1 ? is being built from the spec’s Joe did a few yrs back (great they still had them). Sent:

I thought someone earlier had said that it did work on both spindles. I didn't think to ask but I guess my question would be if it works on the F700 will it also work on the F900? Dave

I have been on the fence on this. Noted that Dave R said that his 30mm Felder quick lock also works on 1.25” spindle. Do we know, what we are ordering would work with both 30mm and 1.25”

Are all of the machines 3 phase?

Add me to it’s for one. Gil Fuqua Nashville