开云体育

Tom, If you are interested in Festool power station, I would definitely check operational temp requirement. Battery performance drops in cold temps and you have plenty of that in Minnesota. The

Tom, Have you considered a 240 volt portable battery set up? Like this only 240 volts? https://www.youtube.com/watch?v=8b015OS6LXs <https://www.youtube.com/watch?v=8b015OS6LXs>

This is great info, thank you gentlemen! As Mark Thomas points out, yeah this is a bespoke (made in-house by Mafell) "universal" motor, so there's no re-winding or modifying it. Imran, yeah the

Ameer, My first step would be to check with Felder if U 2.1 is normal or an error code. I do not know if the machine even displays error codes. Could be software version, who knows? If you call Felder

Festool battery is 1555Whr. So only good for little over 1 hr runtime for the 1300W saw even less for 2500W model. Maybe that is enough for intermittent use. I think besides checking with OEM options

Please check emergency stops and all limit switches as your first step. Imran

I am measuring after the breaker. Swapping lines out of the breaker does not change the measurement so the issue is before the breaker. When I first measured currents Leg “B” was low. It was low

I don't think you could replace the motor with other than OEM.? This isn't a standard form factor generic motor, it's an OEM thing with specialized housing, integrated right angle reduction gearing,

Hi Hope all is well Its great be part of such an informative group .. I have a problem with a used kappa 4 format 450 panel saw I purchased The machine was running previously and now all of a sudden

A step-up / step-down transformer should solve your dilemma I think. Here’s an example: https://www.grainger.com/product/DAYTON-Step-Up-Step-Down-Voltage-16V986?opr=APPD&analytics=altItems_30C515

Tom love My Erica,mine is 240 though. And over 30 years old. martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@...

This looks very similar to my KF700 from 2002. I have the 1200mm slider which doesn't even have an outrigger. Original owner paid $8,500 for the KF700 and an AF-22 dust collector so Imran is pretty

Imran, Immediately upon power up my display shows "U 2.1" for about 2 seconds. Then it will display either inches or mm. If I want to change the units, I have to power off and then hold the reset

My guess is that this new cost $8K give or take a few. Imran

That’s not an eight or nine foot stroke machine, that’s the 2 meter slider, so about 78”. That changes things quite a bit, still a great machine for solid wood processing, but not so great if

If you can get the machine in 240V three phase, then a VFD in a small enclosure that takes 120V input and outputs 240V three phase is pretty easy to configure. I don’t know what the HP of these

We went to the show and were both fairly disappointed. The huge machinery booths were still there, but most of the smaller people were absent, or had a minimal booth presence, less machines and not

If you love your current saw, just find a good source for the replacement motor when you need it. And maybe take your current saw to a motor shop to see if they can do repairs if it needs in the

Will be able to go play with the machine this weekend. Don’t know all the accessories but will dig around. Thank you all for the help. Any things further in particular I should look for feel free to

Greetings! I had considered posting this in the Mafell forum, but I suspect there's a little more electrical aptitude here. I've been using a Mafell ERIKA 70 for several years now for my on-site work,