开云体育

I managed to snap off the speed control knob at the rotary encoder stem while mounting the drill press head to the column. I reached out teknatool earlier this week and they’re shipping me a

Sorry to hear that Stan. It’s kind silly that packaging is an afterthought on such expensive machine. ?I hope Felder does the right thing soon and you’re back to enjoying your new toy. Keep us

Hi Wedge, sorry, I missed your question. currently it looks like we have only 2 people who are interested in the two machines configuration (that has upgraded flip lever). I would need to ask the

Oh I am definitely not going to let that.... slide. Upon opening the main pallet I discovered that the xcut fence was not secured to the chassis so I now have a scratched chassis (whatever) and

I never received any confirmation or solid answers to my questions from Netanel. I’m assuming you must have had enough people opting in on this endeavor. But, I was still waiting on my questions

That's exciting, thanks so much for doing this Netanel!

I give people some time to find this post. I’ll start with the process in the first week of June.

Thank you all for the advice and pointers and saving me from more frustration! Managed to eliminate the snipe by pulling the outfeed fence forward by around 1/16" (had to play around with this) and

Stan, That is so terrible to hear.? Every time I have something delivered I have the fear in the pit of my stomach that something will be damaged.? Hold Felder accountable and get a new slider.? I

There is no excuse for this, but Felder has a history of poor packaging processes. You should demand a replacement sliding table. Take lots of photos. David Best DBestWorkshop@...

So my new toy was delivered by ABF today, on a flatbed with a piggyback forklift. The driver graciously agreed to maneuver it into my garage so the pallet is level and I can use the usual tricks to

Jeff, Nice shop made fence and especially the shop made plexiglass pressure element! Better than spending big bucks for the Aigner one!

Hats off to Joe C for what I learned in class regarding cutting profiles for sticking utilizing an outboard fence. This is how it evolved on my machine. Absolutely eliminated chatter/snipe issues.

Hi Kamal, I've been reading the comments you have received from this thread. You have received some great advice and excellent tips for this particular issue. But this is the tip of the iceberg in

Pictures did not attach. Trying again.

A false zero fence can be helpful here especially for short stock. I generally don’t use them for cutters in the 160mm diameter or so but some of the storm proof cutters for doors and windows are in

Yes if you were removing 1/16 and the fences not offset you will certainly get snipe at the end. On Felder shapers since it’s the outfeed fence that adjusts its very simple to hand feed a piece in a

Yes, it's hard to tell in pics, but it looked like your fences were in line with each other.? Bumping the outfeed out 1/16 will help with a lot of the snipe but verify with your next test that the

If this was just an issue of the outfeed fence not being positioned correctly to receive the component after a full face sticking cut, you wouldn't typically see the leading edge shoved away from the

A false/continuous/sacrificial fence only (generally) works on a partial profile cut. On a full profile cut, the outfeed needs to be offset the same as the depth of cut. You would need a stepped