开云体育

Thanks fellas for the responses and some observations/questions: 1.? I am making full depth cuts resulting in the material being 1/16" less wide than when started and did NOT make any adjustments to

I also had this problem, and spent a lot of time getting the fence coplanar, but the problem still persisted. For me the cause was very slight bowing in longer pieces causing the trailing edge to drop

Maybe this would work with the power feeder on its side? I used zero clearance sacrificial fence quite often.

You can try a combination of things to correct this: 1 - Reorient your power feeder so that it drives the material against the outfield fence with better control as Jared suggested 2 - Stagger the

Hello All, Do any of you live in or near Salt Lake City? Do you also happen to have a jointer/planer with the mobility kit?? If so, I have a very odd request. Could I borrow your lifting lever for a

Looks to me the fault is in the fence setup. Snipe at the end usually indicates the outfeed fence has to move forward. To use the split fence effectively requires tuning the fences to a high degree.

You can try more toe in on the feeder and swapping to poly wheels would possibly help. Alternatively I rarely run sticking against the main fence, and almost always use a outboard fence for a full

Evening all, am having issues processing sticking cuts on rails with a power feeder.? See attached pictures but generally when the end of the material is about to leave the infeed fence, it is

Hi Bob, Monday afternoon sounds good. ?I sent you a message with my number. Thanks Jared

David, I used Unibond 800 for most of my veneering work. There are various colors of powder to mix with the glue. For example darker colors for darker wood, etc. Here is are acouple of photos of a

I am interested in seeing the saw next week if it still available.? I plan to be in Seattle on Monday.? Would late afternoon work?? If so, please give me your address and phone. -Bob

That's it. Thanks Wade. [email protected]> wrote:

John, Here’s a picture of that plastic piece. Hopefully you can make it out. I have my telescoping extension removed from the 1100mm cross cut fence. This plastic disc sits right where the threads

Any progress report on this kit? Mike

Thanks Wade. No big hurry.

I’ll get a pic posted when I get home. About an hour out.

Hello Wade, any chance you can post a photo pointing to where it goes? I have a 6' fence with a flip stop.

It’s a “padding” piece for the threaded set stop on my 1100mm cross cut fence. Wade

Could it go to the parallel guide on the end that goes into the fence? I already boxed up the fence rod exstension rod inside.? I took everything apart and put the pieces in a baggie.

Hello, I am in the middle of selling things and have been taking some items apart to make it easier to pack for shipping. I found this on the ground and am trying to identify what thing it goes to so