开云体育

Here are a couple pictures of a renovation job my neighborhood maybe 15 years ago first picture is 68 mm standard US store with a 56 mm jam then is the z profile and Plaster Second picture is a

Unless you can find a supply house with z bead in town that has it in stock you have to buy a whole case…I spent a half day running around Cincinnati and calling all supply houses to find

Way too many teeth called to make a great blade that’s inexpensive and I think it’s 300 diameter and 20 tooth maybe or 28 tooth AB replace. Mac,, martin/campshure/co/llc mac campshure 7412 elmwood

where does battle ship linoleum get its name? google.com martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330

Dave, I used a glue down commercial grade vinyl. ?Very happy with this product. ?Looks good, easy to sweep, easy to repair like vinyl tires. ?It seems to be a bit more resilient than hard concrete

Chris, I should have added that in my experience one does not need high tooth count for cross cutting solid wood. The PN I shared below, you can see in application column, is recommended for veneer

Chris, Below is a response I posted some time ago on my FB group. Here is the list of blades from Tenryu for sliding table saws and the PN for ATAFR is IW-300100AB3 Tenryu America, Inc. - Tenryu

Hi there all, I'm sure this has been discussed many times here, but I'm looking for a cross cut blade for my kf700 for hardwoods. Material thickness 30mm+ I have a tenryu 60 tooth blade and it has

For the ceiling, I'd be more comfortable with locking buttons instead of z-clips. https://www.leevalley.com/en-us/shop/hardware/fasteners/connectors/70520-button-fix-in-line-panel-couplers Sent from

Hi Dave Unfortunately, it is too early for me to make a recommendation, but it's likely our new workshop floor will be "burnished" concrete.? It's also recommended I apply a good sealer after that.?

Hi Mariusz Clinton's suggestion is what came to mind when I read your post. In addition to that, having the "shadow area" including edges of the ply all black helps too. (check out this Scott Brown

Hi Mariusz I am an architect. Joins between different materials are always complicated. The simplest treatment is to create a deliberate "shadow line". This can be a fixed gap between the ply and

Hi Michael, I have heard of these current limiting devices but have no personal experience. It may be a simpler solution. Inrush Current ametherm.com We never learned ladder logic in ELectrical

Thank you Brian and Mac! Mac, I’m glad the spindle worked out at the end!

Found concrete densifiers. Densifiers seem to be different than sealers? Dave Davies [email protected]> wrote: -- Dave & Marie Davies www.myfinishingtouch.com 318-219-7868

Concrete sealers can be clear or tinted and the good stuff you won’t find at the big box stores. I have used Sika sealers on past projects and will more than likely use it on a shop I’m building

Does anyone have a ladder diagram for the motor control for the KF700 S?? I have the schematic that came with the saw, which is helpful, but also somewhat confusing.? A ladder diagram would be so

When you guys say "seal", what is the material?? I'm picturing Costco.? Is that what you are describing?

Z Shadow Bead Aluminum STR-063-063 5/8" W x 5/8" D x 10' Lg. Prime Painted drywalltrims.com Mariusz, This is one style I’ve used numerous times also just a butt line with a steel profile the z

OK, I uploaded another version that's .25mm thicker, it's called the Felder spinter block 37mm wide. Brian Lambblamb11@...