开云体育

Hi Aaron, Isn’t it similar to Reeves drive in principle which is used on machines? I have not kept up on CVTs but Honda, Nissan and Toyota all use them. The interesting fact in early development was

I too will take a set for a single KF700 Just let me know when and where to send $$$ Thanks to you and David for all the effort you have put into this project. Sure would be nice if Felder would

The Powermatic 2800B uses what is called a Constantly Variable Transmission (CVT) -- (inside the 2800B, it's actually 2 separate CVTs).? I have not seen any other woodworking machinery that uses this

Hi Stan, At least you know where you want to go.?? You are kind of undecided between the 1250mm table and the 2000mm table (cutting length define the max table movement and are actually misleading

Add me to the list for a single set. ?Thanks for taking this on… Mike M.E. Blake General Contractors

Hello FOG, I have a brand new AD941, a RL 140 and a Nova Voyager drill press for sale. I am located in Austin, Texas. After a really long wait to get all of them I am moving and will not be able to

Hi Stan, Good to know on the PM2800B. Looking at the exploded parts diagram, it looks like those drill presses use an entirely different mechanism than the 2820EVS, so whatever the issue was on the

Hi Kevin, I assume you are asking me about my write-up of the many I shared. If so, I should be able to confirm, if you share the electrical schematic of your machine with me. You can share it here or

Imran, any idea if this will also work for a K3?

?Hello Netanel, Just wanted to clarify the parts included. The single machine option would include the reversible T-nut with built in leveling set screws? And when sending in the aluminum block

Due to the discussion of some buying a new saw, thought I share few solutions members have come up with for adding wired and wireless control switches. Depending upon the location of control switches

Please add me to the list for one unit. Bill Webb

Please add me to the list for one unit. Thanks! Tim Nelle Eureka, Texas

Thanks for the clarification. Put me down for the two machine kit. Craig

The flip stop is only included if you purchase the two machine kit

Count me in. Will the components also include the new flip stop? Many thanks to you and David both. Craig

B Lam - The metal shop knows the required tolerance of 0.002 between the T nut and the bushing. Bill - I’ll be using the latest design from David. you are right about the components (T-nut with 2

Yes, if it’s complete and doesn’t need modification during install.

Thanks for ?putting this together. ?I saw that David Best's linked album shows a preliminary design and a final design. ?Am I correct in thinking that your kit will be machined per David's final

I can second Netanel on finish from Tersa. It is smooth and in raking light you can see the blade mark lines but not feel them. I go to 180 (unless need lower grit finish) and do a few swipes to